3047400 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  6 mm²
• Degree of pollution
  3
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Tensile test result
  Test passed
• Setpoint
  5 N
• Conductor cross section short circuit testing
  4 mm²
• Oscillation, broadband noise test result
  Test passed
• Number of connections
  2
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Insulating material group
  I
• Finger protection
  guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
ECLASS 4.0
27141100
Number of levels
1
Insulating material
PA
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Tightening torque, min
1.5 Nm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Color
gray
Nominal current IN
30 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Maximum load current
30 A (with 10 mm² conductor cross section)
Open side panel
Yes
Nominal voltage UN
500 V
Bending test turns
135
Result of flexion and pull-out test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ETIM 6.0
EC000902
ETIM 4.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 11
39121410
Result of thermal test
Test passed
Acceleration
30g
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Screw connection
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Tightening torque max
1.8 Nm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Tight fit on carrier
NS 35
Short-time current
0.15 kA
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.2 mm²
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
100.8 mm
Screw thread
M4
Conductor cross section solid max.
10 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
49.6 mm
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded max.
2.5 mm²
ECLASS 4.1
27141100
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Width
8.2 mm
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, stranded min.
0.2 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
Height NS 35/15
57.1 mm
UNSPSC 18.0
39121410
ETIM 7.0
EC000902
UNSPSC 12.01
39121410
ASD level
11.83 (m/s2)2/Hz
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
ECLASS 7.0
27141126
UNSPSC 19.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ETIM 2.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ECLASS 9.0
27141126
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
ECLASS 10.0.1
27141126
ETIM 3.0
EC000902
UNSPSC 20.0
39121410