3045062 Phoenix Contact Terminal Blocks

3045062 Product Details

• Height NS 35/15
  55 mm
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Setpoint
  1 N
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 1, class B, body mounted
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Static insulating material application in cold
  -60 °C
• Height NS 35/7,5
  47.5 mm
• Stripping length
  9 mm
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible max.
  2.5 mm²
• Nominal cross section
  2.5 mm²
• Area of application
  Machine building
• Degree of pollution
  3
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• 2 conductors with same cross section, solid max.
  1.5 mm²
Nominal current IN
24 A
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal voltage UN
1000 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Shock duration
30 ms
Number of shocks per direction
3
Tightening torque max
0.6 Nm
Tightening torque, min
0.5 Nm
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.77 W
Open side panel
Yes
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2.2 kV
Result of voltage-drop test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Maximum load current
32 A (with 4 mm² conductor cross section)
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
End cover width
2.2 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Color
red
Overvoltage category
III
Conductor cross section solid min.
0.14 mm²
Max. AWG conductor cross section, flexible
12
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Short circuit stability result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Length
47.7 mm
Number of connections
2
Insulating material
PA
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Conductor cross section AWG max.
12
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
5.2 mm
Screw thread
M3
Conductor cross section AWG min.
26
ECLASS 4.1
27141100
ECLASS 4.0
27141100
ETIM 6.0
EC000897
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally Friendly Use Period = 50 years
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
ECLASS 5.1
27141100
ECLASS 7.0
27141120
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Operating temperature
-60 °C ... 85 °C
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Internal cylindrical gage
A3
ECLASS 10.0.1
27141120
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 4.0
EC000897
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410

Product condition