3038600 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Short-time current
  0.18 kA
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock form
  Semi-sinusoidal
• Static insulating material application in cold
  -60 °C
• Height NS 35/7,5
  36.5 mm
• Color
  gray
• Nominal current IN
  17.5 A (with 1.5 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
• Result of thermal test
  Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Nominal cross section
1.5 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W
Finger protection
guaranteed
Potentials
1
Insulating material
PA
Insulating material group
I
Maximum load current
17.5 A (in case of a 1.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
1.5 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
72 mm
Conductor cross section solid max.
1.5 mm²
Min. AWG conductor cross section, flexible
28
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of levels
1
Rated surge voltage
6 kV
Nominal voltage UN
500 V
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Setpoint
1 N
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection
1 level
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Spring-cage connection
Conductor cross section flexible min.
0.08 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
4.2 mm
Height NS 35/15
44 mm
Stripping length
10 mm
Conductor cross section AWG max.
16
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Conductor cross section solid min.
0.08 mm²
Connection in acc. with standard
CUL
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410