3038464 Phoenix Contact Terminal Blocks

3038464 Product Details

• UNSPSC 18.0
  39121410
• UNSPSC 20.0
  39121410
• Short circuit stability result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Relative insulation material temperature index (Elec.; UL 746 B)
  130 °C
• Open side panel
  Yes
• Finger protection
  guaranteed
• Conductor cross section short circuit testing
  4 mm²
• Acceleration
  30g
• Number of shocks per direction
  3
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• ASD level
  6.12 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  5.2 mm
• End cover width
  2.2 mm
• Conductor cross section solid max.
  4 mm²
• Conductor cross section AWG max.
  12
Flammability rating according to UL 94
V0
Insulating material group
I
Result of surge voltage test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection method
Spring-cage connection
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Nominal current IN
22 A
Nominal voltage UN
500 V
Power frequency withstand voltage setpoint
1.89 kV
Oscillation, broadband noise test result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Test duration per axis
5 h
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
78 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Degree of pollution
3
Result of flexion and pull-out test
Test passed
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Back of the hand protection
guaranteed
Surge voltage test setpoint
7.3 kV
Bending test turns
135
Result of aging test
Test passed
Connection in acc. with standard
CSA
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Maximum load current
26 A (with 4 mm² conductor cross section)
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
55 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Color
gray
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tight fit on carrier
NS 35
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ETIM 2.0
EC000897
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Tensile test result
Test passed
Tractive force setpoint
60 N
Result of temperature-rise test
Test passed
Number of connections
4
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Conductor cross section tensile test
4 mm²
Result of voltage-drop test
Test passed
Height NS 35/15
62.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
Number of levels
2
Overvoltage category
III
Bending test rotation speed
10 rpm
Setpoint
1 N
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
8 mm ... 10 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410

Product condition