3038367 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Area of application
  Railway industry
• Degree of pollution
  3
• Open side panel
  No
• Surge voltage test setpoint
  7.3 kV
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Tractive force setpoint
  80 N
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  2.5 mm²
• Result of thermal test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• End cover width
  2.2 mm
• Conductor cross section solid max.
  6 mm²
• Conductor cross section AWG max.
  10
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Color
  gray
Maximum load current
20 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
44 mm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
8 mm ... 10 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000903
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Number of connections
2
Rated surge voltage
6 kV
Insulating material group
I
Nominal voltage UN
500 V (voltage is determined by the plug used)
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
6.2 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection method
Spring-cage connection
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 2.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible min.
0.08 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Conductor cross section tensile test
6 mm²
Setpoint
1 N
Requirements, voltage drop
≤ 6,4 mV
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
61.5 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Nominal cross section
4 mm²
Insulating material
PA
Connection in acc. with standard
CSA
Nominal current IN
20 A (with 6 mm² conductor cross section)
Maximum power dissipation for nominal condition
1.02 W
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Short circuit stability result
Test passed
Short-time current
0.3 kA
Acceleration
30g
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
36.5 mm
Conductor cross section solid min.
0.08 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 7.0
27141126
ETIM 4.0
EC000903
ETIM 7.0
EC000902
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410