3038228 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal voltage UN
  400 V
• Back of the hand protection
  guaranteed
• Conductor cross section short circuit testing
  10 mm²
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Length
  87 mm
• Height NS 35/7,5
  49 mm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  1.5 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• ECLASS 4.0
  27141100
• ECLASS 5.0
  27141100
• ETIM 6.0
  EC001329
• UNSPSC 12.01
  39121410
• UNSPSC 21.0
  39121410
• Insulating material
  PA
• Nominal current IN
  57 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Shock form
Half-sine
Width
10 mm
Height NS 35/15
56.5 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Stripping length
18 mm
ECLASS 10.0.1
27141125
ECLASS 5.1
27141100
ECLASS 9.0
27141125
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Number of connections
2
Degree of pollution
3
Rated surge voltage
6 kV
Connection in acc. with standard
IEC 60947-7-1
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 (+/- 2) rpm
Result of tight fit on support
Test passed
Short-time current
1.2 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
End cover width
2 mm
Conductor cross section flexible max.
10 mm²
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Operating temperature
-60 °C ... 85 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 4.0
EC001329
ETIM 7.0
EC001329
UNSPSC 20.0
39121410
Nominal cross section
10 mm²
Maximum load current
57 A (with 16 mm² conductor cross section)
Maximum power dissipation for nominal condition
1.82 W
Finger protection
guaranteed
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Acceleration
30g
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 2.0
EC001329
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Color
blue
Overvoltage category
III
Open side panel
Yes
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
16 mm²
Connection method
Spring-cage connection
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141125
ECLASS 7.0
27141125
ETIM 3.0
EC001329
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410