3035234 Phoenix Contact Terminal Blocks

3035234 Product Details

• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Short-time current
  0.72 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Connection method
  Spring-cage connection
• Conductor cross section solid min.
  0.08 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Number of positions
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.02 W
• Finger protection
  guaranteed
• Note
  Without diode measured.
• Bending test rotation speed
  10 rpm
Tight fit on carrier
NS 35
Setpoint
1 N
Conductor cross section short circuit testing
6 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
56 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Number of levels
1
Insulating material
PA
Maximum load current
1.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
6.2 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141127
Number of connections
2
Rated surge voltage
8 kV
Nominal current IN
1.5 A
Open side panel
Yes
Bending test turns
135
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141127
ECLASS 9.0
27141127
ETIM 7.0
EC000903
UNSPSC 19.0
39121410
Color
gray
Insulating material group
I
Overvoltage category
III
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
11.83 (m/s2)2/Hz
Acceleration
30g
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
44 mm
Conductor cross section AWG min.
28
Min. AWG conductor cross section, flexible
28
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 4.0
EC000903
UNSPSC 12.01
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000903
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ETIM 2.0
EC000903
ETIM 6.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
ECLASS 5.0
27141100
ECLASS 7.0
27141127
UNSPSC 11
39121410
UNSPSC 21.0
39121410

Product condition