3034248 Phoenix Contact Terminal Blocks

Product Details

• Result of flexion and pull-out test
  Test passed
• Color
  black
• Overvoltage category
  III
• Nominal current IN (upper level)
  10 A
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Result of aging test
  Test passed
• Result of thermal test
  Test passed
• Acceleration
  30g
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Number of levels
  1
• Maximum power dissipation for nominal condition
  0.77 W
• Insulating material group
  I
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.5 kV
• Testing the rated value of the power dissipation (overload and short circuit Protection)
  Test passed
• Temperature cycles
  192
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
58.8 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible max.
6 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
ECLASS 11.0
27141116
ECLASS 5.0
27141100
ETIM 6.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Insulating material
PA
Connection in acc. with standard
CUL
Fuse
G / 5 x 20
Note
Swing the locking lever to its final position before replacing the fuse.
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
71.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 5.1
27141100
ETIM 2.0
EC000899
ETIM 7.0
EC000899
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Rated surge voltage
6 kV
Degree of pollution
3
Nominal current IN
10 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Fuse type
Glass / ceramics / ...
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Contact resistance
Test passed
Result of temperature-rise test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
12.2 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ECLASS 4.1
27141100
ETIM 3.0
EC000899
UNSPSC 12.01
39121422
UNSPSC 20.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Rated operating voltage
250 V
Maximum load current
10 A (with 4 mm² conductor cross section)
Nominal voltage UN
500 V
Maximum load current (upper level)
10 A
Finger protection
guaranteed
Surge voltage test setpoint
4.8 kV
Bending test turns
135
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Stripping length
12 mm
ECLASS 10.0.1
27141116
ECLASS 7.0
27141116
ETIM 4.0
EC000899
UNSPSC 11
39121422
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
51.3 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection method
Leg spring connection
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27141100
ECLASS 9.0
27141116
UNSPSC 7.0901
39121422
UNSPSC 6.01
30211825
UNSPSC 21.0
39121410