3033126 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Connection method
  Screw connection
• Maximum load current
  125 A (with 50 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Nominal cross section
  35 mm²
• Degree of pollution
  3
• Overvoltage category
  III
• Nominal voltage UN
  1000 V
• Surge voltage test setpoint
  9.8 kV
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Tight fit on carrier
  NS 35/7.5
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test spectrum
  Service life test category 1, class B, body mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  4.06 W
• Nominal current IN
  125 A
• Result of power-frequency withstand voltage test
  Test passed
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
10 N
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
1.857 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Number of levels
1
Flammability rating according to UL 94
V0
Connection in acc. with standard
UL
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tractive force setpoint
236 N
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Number of connections
5
Rated surge voltage
8 kV
Insulating material group
I
Open side panel
No
Conductor cross section tensile test
35 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
18 mm
Conductor cross section solid max.
50 mm²
Conductor cross section flexible, with TWIN ferrule min.
1.5 mm²
Power frequency withstand voltage setpoint
2 kV
Requirements, voltage drop
≤ 1.6 mV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
16.2 mm
Max. AWG conductor cross section, flexible
2
Conductor cross section flexible, with ferrule without plastic sleeve min.
1.5 mm²
Tightening torque max
3.7 Nm
2 conductors with same cross section, stranded max.
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
Conductor cross section short circuit testing
6 mm²
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
46.8 mm
Conductor cross section flexible min.
1.5 mm²
UNSPSC 21.0
39121410
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Conductor cross section AWG max.
1/0
Min. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
Tightening torque, min
3.2 Nm
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Result of tight fit on support
Test passed
Acceleration
5g
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
54.3 mm
Conductor cross section flexible max.
35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1.5 mm²
2 conductors with same cross section, solid max.
16 mm²
2 conductors with same cross section, solid min.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
ECLASS 4.1
27141100
ECLASS 4.0
27141100
ETIM 3.0
EC000897
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Length
86 mm
Conductor cross section solid min.
1.5 mm²
Screw thread
M6
Conductor cross section flexible, with TWIN ferrule max.
10 mm²
2 conductors with same cross section, stranded min.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Internal cylindrical gage
A5
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
10 mm²
ECLASS 10.0.1
27141120
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section AWG min.
16
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Short-time current
0.72 kA
Shock form
Half-sine
Conductor cross section flexible, with ferrule without plastic sleeve max.
35 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²