Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

3026285 Phoenix Contact Terminal Blocks

Phoenix Contact 3026285 Slide-type terminal block, with slide, nom. voltage: 400 V, nominal current: 41 A, connection method: Screw connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15,
Phoenix Contact

Part#:3026285

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 50

Nov 2, 2024

Slide-type terminal block, with slide, nom. voltage: 400 V, nominal current: 41 A, connection method: Screw connection, number of connections: 2, cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, width: 8.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15,

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 3026285 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Overvoltage category
    III
  • Nominal voltage UN
    400 V
  • Finger protection
    guaranteed
  • Nominal cross section
    6 mm²
  • Degree of pollution
    3
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Requirements, voltage drop
    ≤ 3.2 mV
  • Result of thermal test
    Test passed
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Conductor cross section solid max.
    10 mm²
  • Number of levels
    1
  • Flammability rating according to UL 94
    V0
  • Maximum power dissipation for nominal condition
    1.31 W
  • Maximum load current
    57 A (with 10 mm² conductor cross section)
  • Result of surge voltage test
    Test passed
  • Result of flexion and pull-out test
    Test passed
  • Length
    91 mm
  • Conductor cross section flexible min.
    0.5 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    0.5 mm²
  • Insulating material
    PA
  • Insulating material group
    I
  • Back of the hand protection
    guaranteed
  • Surge voltage test setpoint
    7.3 kV
  • Bending test conductor cross section/weight
    0.5 mm² / 0.3 kg
  • Conductor cross section tensile test
    10 mm²
  • Setpoint
    5 N
  • Temperature-rise test
    Test passed
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    130 °C
  • Width
    8.2 mm
  • 2 conductors with same cross section, solid max.
    2.5 mm²
  • Stripping length
    10 mm
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.0
    27141100
  • ECLASS 6.0
    27141100
  • ETIM 3.0
    EC000902
  • Open side panel
    Yes
  • Number of connections
    2
  • Rated surge voltage
    6 kV
  • Connection in acc. with standard
    CUL
  • Shock protection test specification
    IEC 60529:2001-02
  • Bending test rotation speed
    10 rpm
  • Tractive force setpoint
    90 N
  • Tight fit on carrier
    NS 32/NS 35
  • Short-time current
    1.2 kA
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Conductor cross section flexible max.
    6 mm²
  • Conductor cross section AWG min.
    20
  • 2 conductors with same cross section, solid min.
    0.5 mm²
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
    0.5 mm²
  • Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
    2.5 mm²
  • Screw thread
    M4
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • REACh SVHC
    Lead 7439-92-1
  • ETIM 2.0
    EC000902
  • UNSPSC 7.0901
    39121410
  • UNSPSC 12.01
    39121410
  • Color
    gray
  • Nominal current IN
    41 A
  • Result of power-frequency withstand voltage test
    Test passed
  • Bending test turns
    135
  • Tensile test result
    Test passed
  • Result of voltage-drop test
    Test passed
  • Conductor cross section short circuit testing
    10 mm²
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    28 MJ/kg
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Conductor cross section solid min.
    0.5 mm²
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    6 mm²
  • 2 conductors with same cross section, stranded min.
    0.5 mm²
  • Connection method
    Screw connection
  • Tightening torque max
    1.4 Nm
  • ECLASS 11.0
    27141120
  • ECLASS 4.1
    27141100
  • ECLASS 7.0
    27141120
  • UNSPSC 6.01
    30211811
  • UNSPSC 18.0
    39121410
  • Power frequency withstand voltage setpoint
    1.89 kV
  • Result of tight fit on support
    Test passed
  • Short circuit stability result
    Test passed
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • Static insulating material application in cold
    -60 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Height NS 35/7,5
    51 mm
  • Conductor cross section AWG max.
    8
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    4 mm²
  • 2 conductors with same cross section, stranded max.
    4 mm²
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • ECLASS 10.0.1
    27141120
  • ECLASS 5.1
    27141100
  • ECLASS 9.0
    27141120
  • ETIM 7.0
    EC000897
  • UNSPSC 13.2
    39121410
  • UNSPSC 19.0
    39121410
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    6 mm²
  • ETIM 6.0
    EC000897
  • UNSPSC 21.0
    39121410
  • UNSPSC 11
    39121410
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    0.5 mm²
  • Tightening torque, min
    1.2 Nm
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
    0.5 mm²
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • UNSPSC 20.0
    39121410
  • ECLASS 4.0
    27141100
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • ETIM 4.0
    EC000902

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$16.73

Stock:

50

Select Qty:

$16.73

$16.73 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo