3009118 Phoenix Contact Terminal Blocks

Product Details

• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height
  76 mm
• Length
  70.5 mm
• Tightening torque max
  8 Nm
• Stripping length
  24 mm
• Conductor cross section AWG max.
  2/0
• 2 conductors with same cross section, stranded min.
  10 mm²
• Min. AWG conductor cross section, flexible
  3
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  16 mm²
• Height NS 32
  81 mm
• Conductor cross section solid min.
  16 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  50 mm²
• Conductor cross section solid max.
  70 mm²
• Max. AWG conductor cross section, flexible
  2/0
• 2 conductors with same cross section, solid max.
  16 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Insulating material group
  I
• Open side panel
  No
Result of flexion and pull-out test
Test passed
Height NS 35/15
83.5 mm
Connection method
Screw connection
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
UNSPSC 18.0
39121410
Number of connections
2
Rated surge voltage
8 kV
Nominal current IN
150 A
Result of power-frequency withstand voltage test
Test passed
Width
20 mm
Screw thread
M6
Connection in acc. with standard
CSA
Conductor cross section flexible min.
25 mm²
2 conductors with same cross section, solid min.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
25 mm²
ECLASS 4.0
27141100
ETIM 6.0
EC000897
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Potentials
1
Insulating material
PA
Degree of pollution
3
Nominal voltage UN
1000 V
Tightening torque, min
6 Nm
Conductor cross section AWG min.
6
Conductor cross section flexible max.
70 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
50 mm²
2 conductors with same cross section, stranded max.
16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Tight fit on carrier
NS 32/NS 35
Result of tight fit on support
Test passed
Result of thermal test
Test passed
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 11
39121410
Color
gray
Maximum power dissipation for nominal condition
4.73 W
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
ECLASS 10.0.1
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
Conductor cross section flexible, with ferrule with plastic sleeve min.
25 mm²
Nominal cross section
50 mm²
Number of levels
1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Maximum load current
150 A (with 50 mm² conductor cross section)
Ambient temperature (assembly)
-5 °C ... 70 °C
Bending test turns
135
Short circuit stability result
Test passed
Result of temperature-rise test
Test passed
Short-time current
6 kA
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Note regarding shock protection
Finger-safe protection is not guaranteed if bridges are positioned.
Bending test conductor cross section/weight
25 mm² / 4.5 kg
Setpoint
10 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Internal cylindrical gage
B10
Finger protection
guaranteed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
50 mm²
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
10 mm²
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed