2981033 Phoenix Contact Electrical Safety Devices

2981033 Product Details

• Height
  99 mm
• Maximum altitude
  max. 2000 m (Above sea level)
• Typ. starting time with Us
  < 20 ms (when controlled via A1)
• Recovery time
  < 1 s
• Contact type
  5 enabling current paths
• Limiting continuous current
  6 A (N/O contact, pay attention to the derating)
• Switching capacity min.
  50 mW
• Sq. Total current
  72 A2 (observe derating)
• Net weight
  205.3 g
• Housing color
  yellow
• pluggable
  Yes
• Safety Integrity Level Claim Limit (SIL CL)
  3 (In conjunction with suitable evaluating device)
• Rated surge voltage/insulation
  Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2, 11/12, 23/24, 71/72 and 33/34, 43/44, 53/54, 63/64
• Vibration (operation)
  10 Hz ... 150 Hz, 2g
• ECLASS 4.0
  40020600
• ETIM 2.0
  EC001449
• ETIM 7.0
  EC001449
• Nominal operating mode
  100% operating factor
• Assembly instructions
  See derating curve
• Conductor cross-section AWG
  24 ... 12
Stripping length
7 mm
Rated insulation voltage
250 V AC
Conformance
CE-compliant
ECLASS 4.1
40020600
ECLASS 5.1
27371900
UNSPSC 6.01
30211901
UNSPSC 11
39121501
UNSPSC 20.0
39122205
Ambient temperature (operation)
-20 °C ... 55 °C (observe derating)
Rated control supply current IS
typ. 81 mA AC
Typical release time
< 20 ms (when controlled via A1)
Protective circuit
Surge protection Varistor
Maximum switching frequency
1 Hz
Maximum inrush current
20 A (Δt  100 ms)
Interrupting rating (ohmic load) max.
144 W (24 V DC, τ = 0 ms)
Output fuse
10 A gL/gG (N/O contact)
Mounting position
vertical or horizontal
Degree of protection
IP20
Connection method
Screw connection
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level (SIL)
3 (In conjunction with suitable evaluating device)
Overvoltage category
III
ECLASS 10.0.1
27371819
ECLASS 7.0
27371819
ETIM 4.0
EC001449
UNSPSC 12.01
39121501
UNSPSC 18.0
39122205
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
114.5 mm
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Rated control circuit supply voltage US
24 V AC/DC -15 % / +10 %
Inrush current
175 mA (Δt = 5 ms at Us)
Maximum switching voltage
250 V AC/DC (Observe the load curve)
Contact material
AgSnO2
Inrush current, minimum
10 mA
Switching capacity (360/h cycles)
4 A (24 V DC)
Mechanical service life
10x 106 cycles
Housing material
PBT
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Stop category
0
Performance level (PL)
e (In conjunction with suitable evaluating device)
Standards/regulations
DIN EN 50178/VDE 0160
Shock
15g
ECLASS 11.0
27371819
ECLASS 6.0
27371800
ETIM 3.0
EC001449
UNSPSC 13.2
39121501
Width
22.5 mm
Ambient temperature (storage/transport)
-40 °C ... 70 °C
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Power consumption at US
typ. 1.94 W (AC)
Operating voltage display
1 x green LED
Filter time
2 ms (at A1 in the event of voltage dips at Us)
Minimum switching voltage
5 V AC/DC
Maximum interrupting rating (inductive load)
42 W (24 V DC, τ = 40 ms)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting type
DIN rail mounting
Min. degree of protection of inst. location
IP54
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Screw thread
M3
Category
4 (In conjunction with suitable evaluating device)
Degree of pollution
2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371900
ECLASS 9.0
27371819
ETIM 6.0
EC001449
UNSPSC 19.0
39122205
UNSPSC 7.0901
39121501
UNSPSC 21.0
39122205

Product condition