2980319 Phoenix Contact Relays

2980319 Product Details

• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Status display
  LED
• Contact type
  Single contact, 1 changeover contact
• Maximum inrush current
  30 A (10 ms)
• Leakage current
  < 1 mA
• Max. load value
  4.5 A2s
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• ECLASS 4.0
  27371100
• ETIM 2.0
  EC001456
• ECLASS 9.0
  27371603
• ETIM 7.0
  EC001456
• UNSPSC 20.0
  39122335
• Height
  80 mm
• Input voltage range in reference to UN
  0.8 ... 1.4
• Nominal input voltage UN
  120 V AC
• Fitting of components
  OPT-60DC/230AC/1
• Minimum switching voltage
  24 V AC
• Interrupting rating (ohmic load) max.
  1.2 W (at 24 V DC)
• Note
  If the specified maximum values are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact.
Operating mode
100% operating factor
Connection method
Screw connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371603
ETIM 6.0
EC001456
UNSPSC 7.0901
39121516
UNSPSC 19.0
39122335
Ambient temperature (operation)
-40 °C ... 55 °C
Protective circuit
Bridge rectifier Bridge rectifier
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Switching capacity min.
100 µW
Output circuit
2-conductor, floating
Color
gray
Connection name
Output side
Screw thread
M3
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ECLASS 6.0
27371600
UNSPSC 11
39121516
UNSPSC 18.0
39122335
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Typical release voltage
50 V AC
Compatible components
Miniature relay, REL-MR-60DC/21AU, REL-MR-60DC/21; miniature optocoupler, OPT-60DC/48DC/100, OPT-60DC/24DC/2, OPT-60DC/230AC/1
Contact material
AgSnO, hard gold-plated
Min. switching current
1 mA (at 24 V)
Voltage drop at max. limiting continuous current
< 1 V
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Designation
Corrosive gas test
Connection in acc. with standard
CUL
ECLASS 5.0
27371600
ECLASS 7.0
27371603
ETIM 3.0
EC001456
UNSPSC 12.01
39121516
Depth
94 mm
Limiting continuous current
0.75 A
Phase angle cos phi min
0.5
Mounting position
any
Conductor cross section AWG
26 ... 14
ECLASS 10.0.1
27371603
ECLASS 5.1
27371600
ETIM 4.0
EC001456
UNSPSC 6.01
30211917
UNSPSC 13.2
39122326
UNSPSC 21.0
39122335

Product condition