2967675 Phoenix Contact Relays

2967675 Product Details

• Depth
  94 mm
• Typical response time
  7 ms
• Operating voltage display
  Yellow LED
• Power dissipation for nominal condition
  1.04 W
• Switching capacity
  2 A (at 24 V, DC13)
• Interrupting rating (ohmic load) max. bridged
  144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
• Mounting position
  any
• Conductor cross section AWG
  26 ... 14
• Standards/regulations
  IEC 60664
• ECLASS 4.1
  27371100
• ETIM 2.0
  EC001437
• UNSPSC 11
  39121515
• UNSPSC 18.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Nominal input voltage UN
  230 V AC
• Type of switch contact
  Single contact
• Minimum switching voltage
  12 V (at 10 mA)
• Mechanical service life
  3x 107 cycles
• Screw thread
  M3
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
Insulation
Safe isolation, reinforced insulation
Overvoltage category
III
ECLASS 5.0
27371600
ECLASS 5.1
27371600
ETIM 6.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 19.0
39122334
Width
14 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Protective circuit
Bridge rectifier Bridge rectifier
Min. switching current
10 mA (at 12 V)
Limiting continuous current
10 A
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Connection in acc. with standard
CUL
Rated surge voltage
6 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 11.0
27371601
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334
Height
80 mm
Typical input current at UN
4.5 mA
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Maximum inrush current
30 A (300 ms)
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Designation
Corrosive gas test
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 12.01
39121515
Ambient temperature (operation)
-40 °C ... 55 °C
Degree of protection
RT II (Relay)
Typical release time
10 ms
Contact type
1 changeover contact
Contact material
AgNi
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Operating mode
100% operating factor
Connection method
Screw connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 21.0
39122334

Product condition