2967604 Phoenix Contact Control Relays
Part#:2967604
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 214
Nov 22, 2024
PLC-INTERFACE for high switch-on currents, consisting of PLC-BSC.../1 IC/ACT basic terminal block with screw connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130 A, 1 N/O contact, input voltage 24 V
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Control Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2967604 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 80 mm
- Typical release time 10 ms
- Note The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Nominal input voltage UN 24 V DC
- Typical input current at UN 18 mA
- Power dissipation for nominal condition 0.43 W
- Min. switching current 100 mA (at 12 V DC)
- Switching capacity 2 A (at 24 V, DC13)
- Type of note Notes on operation
- Ambient temperature (operation) -40 °C ... 60 °C
- Typical response time 8 ms
- Operating voltage display Yellow LED
- Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
- Depth 94 mm
- Degree of protection RT II (Relay)
- Protective circuit Reverse polarity protection Polarity protection diode
- Width 14 mm
- Maximum altitude ≤ 2000 m
- Contact type 1 N/O contact
- Minimum switching voltage 12 V (at 100 mA)
- Interrupting rating (ohmic load) max. bridged 240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.)
- Mounting position any
- Conductor cross section solid 0.14 mm² ... 2.5 mm²
- Conductor cross section AWG 26 ... 14
- Coil voltage 24 V DC
- Contact material AgSnO2
- Interrupting rating (ohmic load) max. 144 W (at 24 V DC)
- Flammability rating according to UL 94 V0 (Housing)
- Connection method Screw connection
- Designation Corrosive gas test
- Pollution degree 2
- ECLASS 10.0.1 27371601
- ECLASS 5.0 27371600
- ETIM 2.0 EC001437
- ETIM 7.0 EC001437
- UNSPSC 21.0 39122334
- Type of switch contact Single contact
- Limiting continuous current 6 A
- Operating mode 100% operating factor
- Mechanical service life 3x 107 cycles
- Stripping length 8 mm
- Connection in acc. with standard CUL
- Rated insulation voltage 250 V AC
- Identification ISA-S71.04. G3 Harsh Group
- ECLASS 4.1 27371100
- ETIM 3.0 EC001437
- ETIM 6.0 EC001437
- UNSPSC 13.2 39122334
- Maximum inrush current 80 A (20 ms)
- Switching capacity min. 1200 mW
- Test voltage 4 kV AC (50 Hz, 1 min., winding/contact)
- Assembly instructions In rows with zero spacing
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Rated surge voltage 6 kV
- Overvoltage category III
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.1 27371600
- ECLASS 7.0 27371601
- ECLASS 6.0 27371600
- UNSPSC 7.0901 39121515
- UNSPSC 6.01 30211916
- UNSPSC 20.0 39122334
- Connection name Contact side
- Screw thread M3
- Insulation Safe isolation, reinforced insulation
- ECLASS 11.0 27371601
- ECLASS 9.0 27371601
- UNSPSC 11 39121515
- UNSPSC 19.0 39122334
- Standards/regulations EN 50178
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27371100
- ETIM 4.0 EC001437
- UNSPSC 12.01 39121515
- UNSPSC 18.0 39122334
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$48.55
Stock:
214
Select Qty:
$48.55
$48.55 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨