2966197 Phoenix Contact Relays

2966197 Product Details

• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Degree of protection
  IP20 (Relay base)
• Typical release time
  15 ms
• Power dissipation for nominal condition
  0.42 W
• Minimum switching voltage
  5 V (at 100 mA)
• Operating mode
  100% operating factor
• Assembly instructions
  In rows with zero spacing
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Designation
  Corrosive gas test
• Overvoltage category
  III
• ECLASS 4.0
  27371100
• ECLASS 7.0
  27371601
• ETIM 6.0
  EC001437
• UNSPSC 11
  39121515
• UNSPSC 18.0
  39122334
• Height
  80 mm
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact material
  AgSnO
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Flammability rating according to UL 94
  V0 (Housing)
Connection method
Screw connection
Screw thread
M3
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
94 mm
Nominal input voltage UN
120 V AC
Type of switch contact
Single contact
Maximum inrush current
10 A (4 s)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Connection in acc. with standard
CUL
Conductor cross section AWG
26 ... 14
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Type of note
Notes on operation
Ambient temperature (operation)
-40 °C ... 55 °C
Typical input current at UN
3.5 mA (at UN = 120 V AC)
Contact type
1 changeover contact
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Standards/regulations
IEC 60664
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
6 ms
Operating voltage display
Yellow LED
Min. switching current
10 mA (at 12 V)
Limiting continuous current
6 A
Mechanical service life
2x 107 cycles
Connection name
Contact side
Stripping length
8 mm
Pollution degree
3
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ECLASS 6.0
27371600
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334

Product condition