2961312 Phoenix Contact Control Relays

Phoenix Contact 2961312 Plug-in miniature power relay, with power contact for high continuous currents, 1 changeover contact, input voltage 24 V DC

Part#:2961312

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 19

Nov 22, 2024

Plug-in miniature power relay, with power contact for high continuous currents, 1 changeover contact, input voltage 24 V DC

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Control Relays that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 2961312 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

Width
12.7 mm
Typical input current at UN
17 mA
Coil resistance
1440 Ω ±10 % (at 20 °C)
Contact type
1 changeover contact
Min. switching current
10 mA (at 12 V)
Limiting continuous current
16 A
Operating mode
100% operating factor
Assembly instructions
Can be aligned without spacing (> 70 °C ≥ 2.5 mm)
Designation
Corrosive gas test
Overvoltage category
III
ECLASS 4.0
27371100
ECLASS 6.0
27371600
ETIM 2.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334
Mounting position
any
Ambient temperature (operation)
-40 °C ... 85 °C
Typical release time
3 ms
Contact material
AgNi
Maximum inrush current
50 A (20 ms)

Interrupting rating (ohmic load) max.

384 W (at 24 V DC)

Test voltage

5 kV AC (50 Hz, 1 min., winding/contact)

Connection in acc. with standard

CUL

Pollution degree

ECLASS 10.0.1

27371601

ECLASS 5.0

27371600

ETIM 4.0

EC001437

UNSPSC 11

39121515

UNSPSC 13.2

39122334

UNSPSC 20.0

39122334

Depth

15.7 mm

Ambient temperature (storage/transport)

-40 °C ... 85 °C

Nominal input voltage UN

24 V DC

Type of switch contact

Single contact

Minimum switching voltage

12 V (at 10 mA)

Switching capacity

2 A (at 24 V, DC13)

Mechanical service life

3x 107 cycles

Connection method

Solder connection

China RoHS

Environmentally friendly use period: unlimited = EFUP-e

ECLASS 4.1

27371100

ECLASS 5.1

27371600

ETIM 7.0

EC001437

UNSPSC 18.0

39122334

UNSPSC 21.0

39122334

Height

29 mm

Degree of protection

RT II

Typical response time

7 ms

Power dissipation for nominal condition

0.41 W

Maximum switching voltage

250 V AC/DC

Motor load according to UL 508

1/2 HP, 120 V AC (N/O contact)

Service life, electrical

see diagram

Standards/regulations

IEC 60664

Identification

ISA-S71.04. G3 Harsh Group

ECLASS 11.0

27371601

ECLASS 9.0

27371601

ETIM 3.0

EC001437

ECLASS 7.0

27371601

ETIM 6.0

EC001437

UNSPSC 7.0901

39121515

UNSPSC 12.01

39121515

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

This item can ship within 5 days!

1-year warranty

$4.71

Stock:

Select Qty:

$4.71

$4.71 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

This item can ship within 5 days!

GVAN11

$10.54

Verified stock: 13

Schneider Electric GVAN11 is an auxiliary contact designed for use with the GV3 range, providing breaker status indication (Open/Closed). It features a rated insulation voltage (Ui) of 690 V, equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. The GVAN11 is engineered for mechanical durability of up to 100,000 operations at no load and maintains the same level of electrical durability with load, ensuring a total of 100,000 operations.

Schneider Electric

This item can ship within 24h!

QOU115

$18.56

Verified stock: 300

Square D by Schneider Electric QOU115 is a miniature circuit breaker (MCB) designed for unit mount installation. It features a rated current of 15A and accommodates slotted box lugs connections on both the load and line sides. This MCB is compatible with a cross-section of 14-2AWG for one aluminum or copper cable and is equipped with a single pole. It has a short circuit breaking rating of 10kA at 240Vac, 5kA at 277Vac, and 5kA at 48Vdc. The QOU115 operates with a rated voltage of 120V and 240V for AC circuits and 48Vdc for DC circuits. Its terminals are designed as box lugs.

Schneider Electric

This item can ship within 24h!

USCC2I

$57.75

Verified stock: 17

USCC2I Mersen - Fuse Holder UltraSafe™ 600VAC 600VDC Class CC 30A 2-Pole LED Pressure Plate IP65

Mersen

This item can ship within 24h!

PK7GTA

$4.90

Verified stock: 1

Square D by Schneider Electric PK7GTA is a grounding part designed to facilitate grounding applications. It features a ground bar equipped with options to enhance its functionality in various grounding scenarios.

Schneider Electric

This item can ship within 24h!

SC10-2ROE

$566.10

Verified stock: 5

Banner Engineering SC10-2ROE is a safety controller designed with a PCCC architecture. It features screw-clamp connections for secure installation and operates on a 24Vdc supply voltage. This part is suitable for DIN rail mounting and can function within an ambient air temperature range of 0 to +55°C. It has an IP20 degree of protection, ensuring it is safeguarded against solid objects larger than 12mm but not protected against liquids. The SC10-2ROE has a net width of 45 mm, a height of 115 mm, and a depth of 100 mm. It supports Ethernet/IP, Modbus TCP, and PROFINET communication protocols for versatile connectivity options. The device is equipped with 1 x safety output (240Vac / 24Vdc; 6A; 3NO contacts) for RO1 and 1 x safety output (240Vac / 24Vdc; 6A; 3NO contacts) for RO2, alongside 10 x safety inputs (15Vdc-30Vdc; including 4 x inputs convertible to non-safety outputs), facilitating comprehensive safety control solutions.

Banner

This item can ship within 5 days!

CP5.241

$210.46

Verified stock: 10

PULS CP5.241 is a power supply unit designed for DIN rail mounting with a net width of 32 mm and an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C. The unit features a current consumption of 7A peak max. inrush at both 230Vac and 120Vac inputs. Its efficiency rates are 0.943 at 230Vac input, 0.935 at 120Vac input, and 0.927 at 100Vac input. The dimensions of the CP5.241 are W32mm x H124mm x D102mm. It has a start-up delay of 380-420ms for 100-230Vac input, with rise times of 80ms and 100ms under nominal input with constant full current load at 0mF and 5mF load capacitance, respectively. The unit includes protection functions such as output overvoltage protection and overload/short-circuit protection, with the capability for series or parallel operation for increased output voltages or power. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 7.3 W at 230Vac input and 8.2 W at 120Vac input with full output load. The output stage capacitance is 1800 µF. Electrical durability varies with conditions, reaching up to 775000 hours at 25°C and 2.5A output with 1AC 230Vac input. The ripple is 50mVpp across 20Hz to 20MHz at 50Ω. This AC/DC power supply unit, part of the CP-series, is designed with a 20% power reserve and includes a DC-OK relay contact output. It features screw-clamp connections and supports a supply voltage range of 85Vac-264Vac for AC and 110Vdc-180Vdc for DC, with a rated current of 5A at 24Vdc. The output voltage is adjustable between 24Vdc and 28Vdc, with a 200mV turn-ON overshoot and a hold time of 35ms at 120/230Vac input.

Puls

This item can ship within 5 days!