2910128 Phoenix Contact DC/DC Converters

Product Details

• Weight0.8 kg
• Comments
  Criterion A
• Electrostatic discharge
  EN 61000-4-2
• Electric strength, max.
  35 V DC (60 s)
• Inrush current limitation typical
  2.3 A
• Input fuse
  20 A (slow-blow, internal)
• Type test (IEC/EN 60950-1) D
  0.5 kV DC
• Production test D
  0.5 kV DC
• Mains buffering
  typ. 17 ms (48 V DC)
• Inrush current integral (I2t)
  < 0.1 A2s
• Type test (IEC/EN 60950-1) B
  4 kV DC
• Production test C
  0.5 kV DC
• Conductor cross section solid
  0.2 mm² ... 1 mm²
• Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
  0.2 mm² ... 1.5 mm²
• Nominal output voltage (UN)
  48 V DC
• Dynamic Boost (IDyn.Boost)
  10 A (5 s)
• System deviation, static
  < 3 % (change in load, static 10 % ... 90 %)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Types of signaling
  LED
• Analog
  4 mA ... 20 mA ±5 % (Load ≤400 Ω)
Output current
5 A
Auxiliary converter stage
190 kHz ... 220 kHz (Auxiliary converter stage)
Hood version
Stainless steel X6Cr17
Height with alternative assembly
130 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Identification
CB scheme (IEC 61010-1, IEC 61010-2-201)
Noise emission
EN 55016
Discharge in air
15 kV (Test Level 4)
Power frequency magnetic field
EN 61000-4-8
Pulse-shape magnetic field
EN 61000-4-9
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Alternating component of DC voltage
EN 61000-4-17
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27210901
Switch-on time
< 1 s
Static Boost (IStat.Boost)
6.25 A
System deviation, input voltage change
< 0.3 % (change in input voltage ±10 %)
Connection in series
yes
UIn
> 0.8 x UInNom (LED off)
Digital
0 V DC
Function
Signal ground
Voltage
1 kV
Degree of protection
IP20
Depth
125 mm
Efficiency
typ. 95.2 % (48 V DC)
Power dissipation SLEEP MODE
< 2 W
Ambient temperature (storage/transport)
-40 °C ... 85 °C
EMC requirements for noise immunity
EN 61000-6-1
Designation
SIQ
DNV GL conducted interference
Class B
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Signal
2 kV (Test Level 3 - asymmetrical)
Test level 1
15 Hz 150 Hz (Test Level 3)
Asymmetrical conducted disturbance variables
EN 61000-4-16
Attenuated oscillating wave
EN 61000-4-18
Input, output (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Typical current consumption
6.8 A (48 V DC)
Insulation voltage input/output
4 kV DC (type test)
Production test A
2 kV DC
Stripping length
8 mm
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Conductor cross section AWG
24 ... 16
Magnetic circuit breaker tripping
A1 ... A6 / B2 / C1 ... C2 / Z1 ... Z6
Short-circuit-proof
yes
Protection against overvoltage at the output (OVP)
≤ 60 V DC
Connection labeling
3.4 +
Maximum contact load
24 V DC
MTBF (IEC 61709, SN 29500)
> 1476000 h (25 °C)
Main converter stage
67 kHz ... 135 kHz (Main converter stage)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Overvoltage category EN 61010-1
II
Standards/regulations
EN 61000-4-29
Conducted noise emission
EN 55016
Additional text
Test Level 2
Test field strength
100 A/m
Output
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Voltage dips
EN 61000-4-29
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Test level 4
15 kHz 150 kHz (Test Level 3)
Signals (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
ECLASS 11.0
27210901
Input voltage range
29 V DC ... 57.6 V DC
Typical response time
300 ms (from SLEEP MODE)
Type test (IEC/EN 60950-1) A
2 kV DC
Type test (IEC/EN 60950-1) C
0.5 kV DC
Production test B
2 kV DC
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Nominal output current (IN)
5 A
Selective Fuse Breaking (ISFB)
30 A (15 ms)
No-load proof
yes
Feedback voltage resistance
≤ 60 V DC
POut
> 100 % (LED lights up yellow, output power > 240 W)
Signal option
Output current
Switch contact
floating
Time
428200 h
Side element version
Aluminum
Width
50 mm
Width with alternative assembly
122 mm
Maximum power dissipation in no-load condition
< 3 W
Vibration (operation)
5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C)
Climatic class
3K3 (EN 60721)
Standard designation
Mains variation/undervoltage
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
DNV GL noise radiation
Class B
Frequency range
50 Hz ... 60 Hz
Surge voltage load (surge)
EN 61000-4-5
Frequency
0 Hz
Damped oscillating magnetic field
EN 61000-4-10
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Input, output (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Signals (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
ECLASS 10.0.1
27210901
Connection method
Push-in connection
Setting range of the output voltage (USet)
48 V DC ... 56 V DC (> 48 V constant capacity)
System deviation, dynamic
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Residual ripple
< 50 mVPP
Rise time
< 1 s (UOUT (10 % ... 90 %))
UOut
> 0.9 x USet (LED lights up green)
Default
Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)
Reference potential
to OUT1, OUT2, REM
Temperature
30 °C
Protection class
Special with SELV input and output
Height
130 mm
Depth with alternative assembly
53 mm
Power loss nominal load max.
< 13 W
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Overvoltage category EN 62477-1
III
EMC requirements, power plant
IEC 61850-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
8 kV (Test Level 4)
Input
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage dip
0 %
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Input, output (test level 3)
10 MHz (Test Level 2 - asymmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.