2910119 Phoenix Contact DC/DC Converters

2910119 Product Details

• Output current
  5 A
• Main converter stage
  50 kHz ... 420 kHz (Main converter stage)
• Hood version
  Stainless steel X6Cr17
• Height with alternative assembly
  130 mm
• Power dissipation SLEEP MODE
  < 1 W
• Ambient temperature (start-up type tested)
  -40 °C
• Maximum altitude
  ≤ 5000 m (> 2000 m, observe derating)
• Climatic class
  3K3 (EN 60721)
• Overvoltage category EN 61010-1
  II
• Identification
  ABS
• Noise emission
  EN 55016
• Electromagnetic HF field
  EN 61000-4-3
• Fast transients (burst)
  EN 61000-4-4
• Surge voltage load (surge)
  EN 61000-4-5
• Frequency
  0 Hz
• Electric strength, max.
  35 V DC (60 s)
• Mains buffering
  typ. 14 ms (24 V DC)
• Typical response time
  300 ms (from SLEEP MODE)
• Input fuse
  15 A (slow-blow, internal)
• Insulation voltage input/output
  4 kV DC (type test)
Type test (IEC/EN 60950-1) C
0.5 kV DC
Production test A
2 kV DC
Production test D
0.5 kV DC
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Static Boost (IStat.Boost)
6.25 A
Selective Fuse Breaking (ISFB)
30 A (15 ms)
No-load proof
yes
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Types of signaling
LED
Connection labeling
3.4 +
Analog
4 mA ... 20 mA ±5 % (Load ≤400 Ω)
Function
Signal ground
Auxiliary converter stage
190 kHz ... 220 kHz (Auxiliary converter stage)
Degree of protection
IP20
Depth
125 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Power loss nominal load max.
< 10 W
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
EMC requirements, power plant
IEC 61850-3
Designation
Shipbuilding
DNV GL noise radiation
Class B
Additional text
Test Level 2
Discharge in air
15 kV (Test Level 4)
Output
1 kV (Test Level 3 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Alternating component of DC voltage
EN 61000-4-17
Signals (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
ECLASS 11.0
27210901
Magnetic circuit breaker tripping
A1 ... A4 / B2 / C1 ... C2 / Z1 ... Z4
Short-circuit-proof
yes
Connection in parallel
Yes, for redundancy and increased capacity
Rise time
< 1 s (UOUT (10 % ... 90 %))
UOut
> 0.9 x USet (LED lights up green)
Default
Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)
Digital
0 V DC
Maximum contact load
24 V DC
Temperature
30 °C
Time
520000 h
Width
36 mm
Depth with alternative assembly
39 mm
Maximum power dissipation in no-load condition
< 2 W
Vibration (operation)
5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C)
EMC requirements for noise immunity
EN 61000-6-1
EMC requirements for noise emission
EN 61000-6-3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
DNV GL conducted interference
Class B
Frequency range
50 Hz ... 60 Hz
Comments
Criterion A
I/O/S
asymmetrical
Voltage dip
0 %
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ETIM 7.0
EC002046
Input voltage range
18 V DC ... 32 V DC
Typical current consumption
6.9 A (24 V DC)
Switch-on time
< 1 s
Inrush current limitation typical
1 A
Inrush current integral (I2t)
< 0.05 A2s
Type test (IEC/EN 60950-1) D
0.5 kV DC
Production test C
0.5 kV DC
Connection method
Push-in connection
Conductor cross section solid
0.2 mm² ... 1 mm²
Conductor cross section AWG
24 ... 16
Nominal output current (IN)
5 A
Dynamic Boost (IDyn.Boost)
10 A (5 s)
System deviation, dynamic
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Residual ripple
< 10 mVPP
UIn
> 0.8 x UInNom (LED off)
Switch contact
floating
Reference potential
to OUT1, OUT2, REM
Side element version
Aluminum
Width with alternative assembly
122 mm
Efficiency
typ. 92.2 % (24 V DC)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Overvoltage category EN 62477-1
III
Standard designation
Mains variation/undervoltage
Conducted noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Input
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Pulse-shape magnetic field
EN 61000-4-9
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Attenuated oscillating wave
EN 61000-4-18
ECLASS 10.0.1
27210901
ETIM 6.0
EC002046
Type test (IEC/EN 60950-1) A
2 kV DC
Type test (IEC/EN 60950-1) B
4 kV DC
Production test B
2 kV DC
Stripping length
8 mm
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Nominal output voltage (UN)
24 V DC
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (> 24 V DC, constant capacity)
System deviation, static
< 1 % (change in load, static 10 % ... 90 %)
System deviation, input voltage change
< 0.1 % (change in input voltage ±10 %)
Connection in series
yes
Feedback voltage resistance
≤ 35 V DC
POut
> 100 % (LED lights up yellow, output power > 120 W)
Signal option
Output current
MTBF (IEC 61709, SN 29500)
> 1600000 h (25 °C)
Voltage
1 kV
Protection class
Special with SELV input and output
Height
130 mm
Weight
0.6 kg
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of pollution
2
Standards/regulations
EN 61000-4-29
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
8 kV (Test Level 4)
Test field strength
100 A/m
Signal
2 kV (Test Level 3 - asymmetrical)
Voltage dips
EN 61000-4-29
Test level 1
15 Hz 150 Hz (Test Level 3)
Test level 4
15 kHz 150 kHz (Test Level 3)
Input, output (test level 3)
10 MHz (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27210901
Damped oscillating magnetic field
EN 61000-4-10
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Input, output (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Signals (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.

Product condition