2909887 Phoenix Contact Electrical Measuring & Monitoring Instruments

2909887 Product Details

• Height
  109.81 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  IP20 (not assessed by UL)
• Current input signal
  0 mA ... 20 mA (via DIP switch)
• Input resistance of voltage input
  > 120 kΩ
• Setting range of the response delay
  0 s ... 10 s (can be set freely via software)
• Typical current consumption
  40 mA (12 V DC)
• Conductor cross section AWG
  24 ... 12 (flexible)
• Maximum temperature coefficient
  0.01 %/K
• Degree of pollution
  2
• Electromagnetic compatibility
  Conformance with EMC directive
• Mounting position
  any
• DNV GL-Humidity
  B
• DNV GL-EMC
  A
• Enclosure
  Required protection according to the Rules shall be provided upon installation on board
• ECLASS 4.0
  27210100
• ECLASS 9.0
  27210122
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Max. input current
  24 mA
• Output name
  Relay output
Min. switching current
100 mA (12 V DC)
Max. switching current
6 A AC (250 V AC)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Connection method
Push-in connection
Maximum transmission error
0.1 % (of final value)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Color
gray
Conformance
CE-compliant
DNV GL-Temperature
B
Temperature
B
EMC
A
ECLASS 4.1
27210100
ETIM 6.0
EC002654
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
max. input voltage
12 V
Maximum switching voltage
250 V AC
Mechanical service life
2x 107 cycles
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Switching point accuracy
< 0.1 %
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
DNV GL-Vibration
A
Identification
UL 508 Listed
Vibration
A
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27210100
ETIM 4.0
EC002654
Ambient temperature (operation)
-40 °C ... 70 °C
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Voltage input signal
0 V ... 10 V (via DIP switch)
Input resistance current input
approx. 50 Ω
Contact material
AgSnO2, hard gold-plated
Nominal supply voltage
24 V DC
No. of channels
1
Status display
Yellow LED (switching output)
Rated insulation voltage
300 V (effective)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Designation
Shipbuilding approval
Certificate
DNV GL TAA000021E
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27210122
ECLASS 5.0
27210100
ETIM 7.0
EC002654
Configurable/programmable
Yes
Contact type
1 changeover contact
Limiting continuous current
6 A AC
Internal hysteresis
can be set freely via software
Power consumption
≤ 0.5 W
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Overvoltage category
II
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
UL, USA/Canada
UL 508 Listed
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Humidity
B
ECLASS 10.0.1
27210122
ECLASS 5.1
27210100
ECLASS 7.0
27210122

Product condition