2909669 Phoenix Contact Relays

2909669 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  80 mm
• Depth
  94 mm
• Nominal input voltage UN
  120 V AC
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact material
  AgSnO
• Operating voltage display
  Yellow LED
• Limiting continuous current
  6 A
• Maximum inrush current
  10 A (4 s)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Connection method
  Push-in connection
• Mechanical service life
  1x 107 cycles
• ECLASS 10.0.1
  27371601
• ECLASS 5.1
  27371600
• ECLASS 6.0
  27371600
• UNSPSC 13.2
  39122334
• UNSPSC 21.0
  39122334
• Type of note
  Notes on operation
• Width
  6.2 mm
• Degree of protection
  RT II (Relay)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical release time
15 ms
Power dissipation for nominal condition
0.42 W
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage
5 V (at 100 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
ECLASS 11.0
27371601
ETIM 3.0
EC001437
ETIM 6.0
EC001437
UNSPSC 20.0
39122334
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 18.0
39122334
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Ambient temperature (operation)
-40 °C ... 55 °C
Typical input current at UN
3.5 mA (at UN = 120 V AC)
Typical response time
6 ms
Type of switch contact
Single contact
Contact type
1 changeover contact
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371601
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 19.0
39122334
Min. switching current
10 mA (at 12 V)
Flammability rating according to UL 94
V0 (Housing)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Overvoltage category
III
Stripping length
8 mm
Pollution degree
3
Switching capacity
2 A (at 24 V, DC13)
Connection name
Contact side
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14
Mounting position
any
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Operating mode
100% operating factor
Standards/regulations
IEC 60664
Identification
ISA-S71.04. G3 Harsh Group

Product condition