Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2909555 Phoenix Contact Electrical Safety Devices

Phoenix Contact 2909555 Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.
Phoenix Contact

Part#:2909555

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2909555 Phoenix Contact price in the box on the right side or send a quick quote.

2909555 Product Details

  • Ambient temperature (operation)
    -25 °C ... 55 °C
  • Rated control circuit supply voltage US
    24 V DC
  • Rated control supply current IS
    60 mA
  • Switching level
    < 5 V DC (For EMERGENCY STOP)
  • Trigger characteristic in acc. with IEC 60947-4-2
    Class 10 (≤ 3 A)
  • Leakage current
    0 mA
  • Mounting position
    vertical (horizontal DIN rail, motor output below)
  • Minimum power dissipation
    0.88 W
  • Connection name
    Load circuit
  • Overvoltage category
    III
  • Standards/regulations
    EN 60947-1
  • FLA
    7.6 A (480 V AC)
  • ECLASS 10.0.1
    27370905
  • ECLASS 6.0
    27024000
  • ETIM 7.0
    EC001037
  • Maximum altitude
    ≤ 2000 m
  • Note
    Confirmation: floating change-over contact, signal contact
  • Rated actuating current IC
    7 mA
  • Typical turn-off time
    < 30 ms
  • Rated operating current Ie
    9 A (AC-51)
  • Switching capacity according to IEC 60947-5-1
    2 A (24 V, DC13)
  • Assembly instructions
    alignable, for spacing see derating
  • Operating mode
    100% operating factor
  • Stripping length
    10 mm
  • Conductor cross section flexible
    0.2 mm² ... 2.5 mm²
  • Insulation
    Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
  • Identification
    ≤ 3
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 5.1
    27024000
  • ETIM 2.0
    EC001037
  • Width
    22.5 mm
  • Height
    107.5 mm
  • Ambient temperature (storage/transport)
    -40 °C ... 80 °C
  • Input name
    Control input and enable input
  • Triggering voltage range
    19.2 V DC ... 30 V DC
  • Mains frequency
    50/60 Hz
  • Cooling time
    20 min. (for auto reset)
  • Switching frequency
    ≤ 2 Hz (Load-dependent)
  • Maximum power dissipation
    7 W
  • Connection method
    Push-in connection
  • Rated insulation voltage
    550 V
  • Degree of pollution
    2
  • Additional text
    Safe shutdown
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.0
    27021100
  • ECLASS 7.0
    27024002
  • ETIM 3.0
    EC001037
  • Depth
    114 mm
  • Degree of protection
    IP20
  • Type of protection
    Surge protection
  • Switching threshold
    9.6 V (“0” signal)
  • Output name
    Acknowledge output
  • Load current range
    1.5 A ... 9 A
  • Contact type
    1 changeover contact
  • Operate threshold
    > 60 A
  • Operating voltage display
    Green LED
  • Status display
    Yellow LED
  • Conductor cross section AWG
    24 ... 14
  • Designation
    Category (ISO 13849)
  • SCCR
    100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
  • Category code
    NLDX / NRNT
  • ECLASS 5.0
    27024000
  • ECLASS 11.0
    27370905
  • ECLASS 9.0
    27370905
  • ETIM 6.0
    EC001037
  • Control supply voltage range
    19.2 V DC ... 30 V DC
  • Rated actuating voltage UC
    24 V DC
  • Rated operating voltage Ue
    500 V AC
  • Operating voltage range
    42 V AC ... 550 V AC
  • Response time
    < 0.5 s
  • Mounting type
    DIN rail mounting
  • Indication
    Red LED
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm²
  • Rated surge voltage
    6 kV
  • Certificate
    NLDX.E228652
  • Group installation
    20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
  • Horsepower ratings
    2 hp (208 V AC)
  • ECLASS 4.1
    27021100
  • ETIM 4.0
    EC001037

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo