2909554 Phoenix Contact Electrical Safety Devices
Part#:2909554
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: Hybrid motor starter as an alternative to a conventional reversing contactor. Reverses 3~ AC motors up to 9 A, provides motor protection, ATEX, and emergency stop up to SIL 3. Group shut-down, supply, and relay extension possible via DIN rail connector.
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2909554 Phoenix Contact price in the box on the right side or send a quick quote.
2909554 Product Details
- Degree of protection IP20
- Rated control supply current IS 60 mA
- Switching threshold 9.6 V (“0” signal)
- Switching level < 5 V DC (For EMERGENCY STOP)
- Cooling time 20 min. (for auto reset)
- Contact type 1 changeover contact
- Operating mode 100% operating factor
- Status display Yellow LED
- Connection name Load circuit
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Degree of pollution 2
- SCCR 100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27021100
- ECLASS 5.0 27024000
- ETIM 3.0 EC001037
- Depth 114 mm
- Rated control circuit supply voltage US 24 V DC
- Input name Control input: right/left and enable input
- Typical turn-off time < 30 ms
- Rated operating current Ie 9 A (AC-51)
- Operate threshold > 60 A
- Mounting type DIN rail mounting
- Maximum power dissipation 7 W
- Indication Red LED
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Designation Category (ISO 13849)
- Additional text Safe shutdown
- Group installation 20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 7.0 27024002
- ETIM 7.0 EC001037
- Ambient temperature (operation) -25 °C ... 55 °C
- Maximum altitude ≤ 2000 m
- Note Confirmation: floating change-over contact, signal contact
- Triggering voltage range 19.2 V DC ... 30 V DC
- Rated operating voltage Ue 500 V AC
- Load current range 1.5 A ... 9 A
- Mains frequency 50/60 Hz
- Assembly instructions alignable, for spacing see derating
- Minimum power dissipation 0.88 W
- Rated insulation voltage 550 V
- Insulation Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
- Category code NLDX / NRNT
- ECLASS 10.0.1 27370905
- ECLASS 4.1 27021100
- ETIM 2.0 EC001037
- ETIM 4.0 EC001037
- Height 107.5 mm
- Control supply voltage range 19.2 V DC ... 30 V DC
- Rated actuating voltage UC 24 V DC
- Output name Acknowledge output
- Leakage current 0 mA
- Switching capacity according to IEC 60947-5-1 2 A (24 V, DC13)
- Switching frequency ≤ 2 Hz (Load-dependent)
- Operating voltage display Green LED
- Stripping length 10 mm
- Overvoltage category III
- Certificate NLDX.E228652
- FLA 7.6 A (480 V AC)
- ECLASS 5.1 27024000
- ECLASS 9.0 27370905
- Width 22.5 mm
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Type of protection Surge protection
- Rated actuating current IC 7 mA
- Operating voltage range 42 V AC ... 550 V AC
- Trigger characteristic in acc. with IEC 60947-4-2 Class 10 (≤ 3 A)
- Response time < 0.5 s
- Mounting position vertical (horizontal DIN rail, motor output below)
- Connection method Push-in connection
- Conductor cross section AWG 24 ... 14
- Rated surge voltage 6 kV
- Standards/regulations EN 60947-1
- Identification ≤ 3
- Horsepower ratings 2 hp (208 V AC)
- ECLASS 11.0 27370905
- ECLASS 6.0 27024000
- ETIM 6.0 EC001037
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨