Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

Live support:

Monday - Friday 6AM - 6PM PST

2908698 Phoenix Contact Electrical Safety Devices

Phoenix Contact 2908698 Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.
Phoenix Contact

Part#:2908698

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: Hybrid motor starter as an alternative to a conventional protective circuit. Starts 3~ AC motors up to 9 A, provides motor protection and emergency stop up to SIL 3/PL e. Group shut-down, supply, and relay extension possible via DIN rail connector.

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2908698 Phoenix Contact price in the box on the right side or send a quick quote.

2908698 Product Details

  • Height
    107 mm
  • Degree of protection
    IP20
  • Rated actuating current IC
    7 mA
  • Rated operating voltage Ue
    500 V AC
  • Cooling time
    20 min. (for auto reset)
  • Switching frequency
    ≤ 2 Hz (Load-dependent)
  • Maximum power dissipation
    7 W
  • Status display
    Yellow LED
  • Screw thread
    M3
  • Torque
    0.5 Nm ... 0.6 Nm
  • Overvoltage category
    III
  • Standards/regulations
    EN 60947-1
  • FLA
    7.6 A (480 V AC)
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 5.1
    27024000
  • ETIM 3.0
    EC001037
  • UNSPSC 18.0
    25173902
  • Ambient temperature (operation)
    -25 °C ... 55 °C
  • Rated control circuit supply voltage US
    24 V DC
  • Input name
    Control input and enable input
  • Typical turn-off time
    < 30 ms
  • Mains frequency
    50/60 Hz
  • Contact type
    1 changeover contact
  • Mounting position
    vertical (horizontal DIN rail, motor output below)
  • Minimum power dissipation
    0.88 W
  • Connection name
    Load circuit
  • Conductor cross section solid
    0.2 mm² ... 2.5 mm²
  • Degree of pollution
    2
  • Certificate
    NLDX.E228652
  • SCCR
    100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
  • Horsepower ratings
    2 hp (208 V AC)
  • ECLASS 5.0
    27024000
  • ETIM 2.0
    EC001037
  • ETIM 4.0
    EC001037
  • UNSPSC 20.0
    25173902
  • Width
    22.5 mm
  • Maximum altitude
    ≤ 2000 m
  • Type of protection
    Reverse polarity protection
  • Triggering voltage range
    19.2 V DC ... 30 V DC
  • Switching level
    < 5 V DC (For EMERGENCY STOP)
  • Operating voltage range
    42 V AC ... 550 V AC
  • Trigger characteristic in acc. with IEC 60947-4-2
    Class 10 (≤ 3 A)
  • Response time
    < 0.5 s
  • Operating mode
    100% operating factor
  • Operating voltage display
    Green LED
  • Connection method
    Screw connection
  • Conductor cross section flexible
    0.2 mm² ... 2.5 mm²
  • Rated insulation voltage
    550 V
  • Identification
    ≤ 3
  • Group installation
    20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
  • ECLASS 11.0
    27370905
  • ECLASS 4.0
    27021100
  • ECLASS 9.0
    27370905
  • UNSPSC 13.2
    25173902
  • Ambient temperature (storage/transport)
    -40 °C ... 80 °C
  • Rated control supply current IS
    60 mA
  • Note
    Confirmation: floating change-over contact, signal contact
  • Switching threshold
    9.6 V (“0” signal)
  • Rated operating current Ie
    9 A (AC-51)
  • Leakage current
    0 mA
  • Switching capacity according to IEC 60947-5-1
    2 A (24 V, DC13)
  • Assembly instructions
    alignable, for spacing see derating
  • Indication
    Red LED
  • Stripping length
    8 mm
  • Conductor cross section AWG
    24 ... 14
  • Rated surge voltage
    6 kV
  • Insulation
    Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
  • Additional text
    Safe shutdown
  • REACh SVHC
    Lead 7439-92-1
  • ECLASS 4.1
    27021100
  • ECLASS 7.0
    27024002
  • UNSPSC 19.0
    25173902
  • Depth
    114 mm
  • Control supply voltage range
    19.2 V DC ... 30 V DC
  • Rated actuating voltage UC
    24 V DC
  • Output name
    Acknowledge output
  • Load current range
    1.5 A ... 9 A
  • Operate threshold
    > 60 A
  • Mounting type
    DIN rail mounting
  • Designation
    Category (ISO 13849)
  • Category code
    NLDX / NRNT
  • ECLASS 10.0.1
    27370905
  • ECLASS 6.0
    27024000
  • ETIM 6.0
    EC001037
  • ETIM 7.0
    EC001037
  • UNSPSC 21.0
    25173902

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo