2907753 Phoenix Contact Redundancy Modules

2907753 Product Details

• Width
  32 mm
• Height with alternative assembly
  130 mm
• Frequency range
  0.15 MHz ... 80 MHz
• Fast transients (burst)
  EN 61000-4-4
• Surge voltage load (surge)
  EN 61000-4-5
• Power frequency magnetic field
  EN 61000-4-8
• ECLASS 7.0
  27371010
• China RoHS
  Environmentally Friendly Use Period = 25;
• ECLASS 6.0
  27371000
• UNSPSC 13.2
  39121004
• Depth
  125 mm
• Installation distance right/left
  0 mm / 0 mm
• Max. permissible relative humidity (operation)
  ≤ 100 % (at 25 °C, non-condensing)
• Nominal input voltage range
  12 V DC ... 24 V DC
• Screw thread
  M4
• Standard – Safety extra-low voltage
  IEC 60950-1 (SELV) and EN 60204-1 (PELV)
• Shipbuilding approval
  DNV GL
• Additional text
  60 s
• Contact discharge
  8 kV (Test Level 4)
• Frequency
  16.67 Hz
ECLASS 10.0.1
27371010
UNSPSC 19.0
32151504
UNSPSC 20.0
32151504
Height
130 mm
Depth with alternative assembly
35 mm
Ambient temperature (operation)
-40 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
8 V DC ... 26 V DC
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment
EN 50178
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
DNV GL noise radiation
Class B
Test field strength
30 A/m
Output
1 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.0
27371000
ETIM 6.0
EC000599
Width with alternative assembly
122 mm
Degree of protection
IP20
Installation height
≤ 5000 m (> 2000 m, observe derating)
Current consumption
40 A
Static Boost (IStat.Boost)
45 A
Connection in series
No
Power loss nominal load max.
6.5 W (IOUT = 40 A)
Efficiency
typ. 99 % (12 V DC)
Housing material
Aluminum / stainless steel
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG max.
16
EMC requirements for noise immunity
EN 61000-6-1
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
UL approvals
UL/C-UL listed UL 508
DNV GL conducted interference
Class A
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Input
1 kV (Test Level 4 - symmetrical)
Conducted interference
EN 61000-4-6
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27371010
ECLASS 9.0
27371010
UNSPSC 18.0
32151504
Installation distance top/bottom
40 mm / 20 mm
Climatic class
3K3 (in acc. with EN 60721)
Output voltage range
8 V DC ... 26 V DC
Nominal output current (IN)
40 A
Selective Fuse Breaking (ISFB)
215 A (15 ms)
Protection against overvoltage at the output (OVP)
≤ 28.8 V DC
MTBF (IEC 61709, SN 29500)
> 13486000 h (25 °C)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise emission
EN 61000-6-3
Standard - Safe isolation
DIN VDE 0100-410
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Conducted noise emission
EN 55016
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Signal
1 kV (Test Level 2 - asymmetrical)
Voltage
10 V (Test Level 3)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27371000
ETIM 7.0
EC000599
UNSPSC 21.0
32151504
Derating
60 °C ... 70 °C (2.5%/K)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid max.
1.5 mm²
Noise emission
EN 55016
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Nominal input current
40 A (-40 °C ... 60 °C)
Dynamic Boost (IDyn.Boost)
60 A (5 s)
Net weight
0.4 kg
Protection class
III
Conductor cross section AWG min.
24
Degree of pollution
2

Product condition