2907380 Phoenix Contact Redundancy Modules

2907380 Product Details

• Height
  130 mm
• ETIM 6.0
  EC002540
• Depth
  115 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Derating
  60 °C ... 70 °C (2.5%/K)
• MTBF (IEC 61709, SN 29500)
  66425178 h (25 °C)
• Conductor cross section solid max.
  2.5 mm²
• Conductor cross section AWG max.
  14
• Standard - Electrical safety
  IEC 60950-1/VDE 0805 (SELV)
• Electrostatic discharge
  EN 61000-4-2
• Contact discharge
  4 kV (Test Level 3)
• Conducted interference
  EN 61000-4-6
• Criterion A
  Normal operating behavior within the specified limits.
• ECLASS 9.0
  27371010
• Width
  35 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Maximum input current
  2x 15 A (-25°C ... 40°C)
• Efficiency
  > 97 %
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Test field strength
10 V/m
Fast transients (burst)
EN 61000-4-4
Voltage
10 V (Test Level 3)
ECLASS 4.0
27250300
ECLASS 5.1
27371000
UNSPSC 13.2
39121004
UNSPSC 18.0
32151504
Installation distance right/left
0 mm / 0 mm
Climatic class
3K3 (in acc. with EN 60721)
Nominal input current
2x 10 A (-25 °C ... 60 °C)
Nominal output current (IN)
20 A
Net weight
0.4 kg
Assembly instructions
alignable: horizontally 0 mm, vertically 50 mm
Screw thread
M3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Input
1 kV (Test Level 3 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
ECLASS 10.0.1
27371010
ECLASS 5.0
27371000
ECLASS 7.0
27371010
UNSPSC 21.0
32151504
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage range
10 V DC ... 30 V DC
Connection in series
No
Mounting position
horizontal DIN rail NS 35, EN 60715
Connection method
Screw connection
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
EMC requirements for noise emission
EN 61000-6-3
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Comments
Criterion A
I/O/S
asymmetrical
ECLASS 11.0
27371010
ECLASS 6.0
27371000
ETIM 7.0
EC002540
UNSPSC 20.0
32151504
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Nominal input voltage range
12 V DC ... 24 V DC
Power loss nominal load max.
5 W (IOUT = 10 A)
Protection class
III
Conductor cross section flexible max.
2.5 mm²
EMC requirements for noise immunity
EN 61000-6-1
UL approvals
UL/C-UL listed UL 508
Electromagnetic HF field
EN 61000-4-3
Frequency range
0.15 MHz ... 80 MHz
Output
1 kV (Test Level 2 - symmetrical)
Voltage dips
EN 61000-4-11
ECLASS 4.1
27250300
UNSPSC 19.0
32151504

Product condition