2907079 Phoenix Contact UPS (DC)

Product Details

• Weight0.7 kg
• Additional text
  DC, 60 s
• Width
  47 mm
• Width with alternative assembly
  123 mm
• Installation distance right/left (active, passive)
  0 mm / 0 mm (POut ≤50 %)
• Installation distance top/bottom (active)
  50 mm / 50 mm (POut ≥50% )
• Climatic class
  3K3 (EN 60721)
• Inrush current
  ≤ 9 A (≤ 4 ms)
• Input voltage range
  18 V DC ... 30 V DC
• UPS connection in series
  no
• Output voltage range
  19 V DC ... 32 V DC
• End-of-charge voltage (temperature-compensated)
  25 V DC ... 32 V DC
• Nominal capacity (without additional charger)
  7 Ah ... 100 Ah
• Buffer time
  45 min. (38 Ah)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  30
• Standards/regulations
  IEC 61010-1 (SELV)
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Contact discharge
  8 kV (Test Level 4)
• Test field strength
  300 A/m
I/O/S
asymmetrical
Designation
CB scheme
Depth
125 mm
Installation distance top/bottom (passive)
40 mm / 20 mm (POut ≥50% )
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Internal input fuse
no
Switch-on time
max. 3 s
No-load proof
yes
Energy storage device connection in parallel
Yes, 5 (observe line protection)
End-of-charge voltage
32 V DC
Charging current (configurable)
5 A
Charge characteristic curve
IU0U
Conductor cross section solid max.
2.5 mm²
Single conductor/terminal point, stranded, with ferrule, min.
0.5 mm²
Conductor cross section AWG max.
12
EMC requirements for noise emission
EN 61000-6-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
UNSPSC 13.2
39121004
ETIM 7.0
EC000382
UNSPSC 18.0
39121011
Height
130 mm
Depth with alternative assembly
49 mm
Installation distance top/bottom (active, passive)
40 mm / 20 mm (POut ≤50 %)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Installation height
≤ 4000 m
Reverse polarity protection
yes
Switch-over time
0 ms
Efficiency
typ. 97 %
Static Boost (IStat.Boost)
45 A
Max. capacity
135 Ah
Temperature sensor
yes
Environmental protection directive
RoHS Directive 2011/65/EU
Conductor cross section flexible min.
0.2 mm²
Tightening torque max
0.6 Nm
Electrostatic discharge
EN 61000-4-2
Frequency range
50 Hz ... 60 Hz
Input
1 kV (Test Level 3 - symmetrical)
Output
1 kV (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040705
UNSPSC 21.0
39121011
Height with alternative assembly
130 mm
Installation distance right/left (active)
5 mm / 5 mm (POut ≥50% )
Degree of protection
IP20
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage
24 V DC
Short-circuit-proof
yes
UPS connection in parallel
no
Dynamic Boost (IDyn.Boost)
60 A (5 s)
Battery technology
VRLA, VRLA-WTR, LI-ION
Charging time
202.5 h
MTBF (IEC 61709, SN 29500)
> 1151000 h (25 °C)
Deep discharge protection
19.2 V DC
Connection method
Screw connection
Single conductor/terminal point, stranded, with ferrule, max.
16 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard designation
Safety extra-low voltage
Comments
Criterion A
Signal
1 kV (Test Level 2 - asymmetrical)
Power frequency magnetic field
EN 61000-4-8
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27040705
ECLASS 9.0
27040705
Installation distance right/left (passive)
0 mm / 0 mm (POut ≥50% )
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Electric strength, max.
35 V DC
Fixed backup threshold
22 V DC
Voltage drop, input/output
0.5 V DC
Energy storage device connection in series
no
Selective Fuse Breaking (ISFB)
215 A (15 ms)
Temperature compensation (configurable)
42 mV/K
IQ-Technology
yes
Life expectancy (electrolytic capacitors)
126720 h
Conductor cross section flexible max.
2.5 mm²
Stripping length
6.5 mm
Tightening torque, min
0.5 Nm
Identification
IEC 61010-1
Discharge in air
15 kV (Test Level 4)
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V (Test Level 3)
Frequency
0 Hz
ETIM 6.0
EC000382
UNSPSC 20.0
39121011
ECLASS 5.1
27242213
UNSPSC 19.0
39121011