2907078 Phoenix Contact UPS (DC)

2907078 Product Details

• Width with alternative assembly
  123 mm
• Installation distance top/bottom (passive)
  40 mm / 20 mm (POut ≥50% )
• Degree of protection
  IP20
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Climatic class
  3K3 (EN 60721)
• Input voltage range
  18 V DC ... 30 V DC
• Switch-on time
  max. 3 s
• No-load proof
  yes
• Selective Fuse Breaking (ISFB)
  215 A (15 ms)
• End-of-charge voltage (temperature-compensated)
  25 V DC ... 32 V DC
• Charging current (configurable)
  5 A
• Temperature sensor
  yes
• Depth
  125 mm
• Installation distance right/left (active)
  5 mm / 5 mm (POut ≥50% )
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Input voltage
  24 V DC
• Inrush current
  ≤ 9 A (≤ 4 ms)
• Voltage drop, input/output
  0.5 V DC
• Energy storage device connection in series
  no
• Efficiency
  typ. 98 %
Output voltage range
19 V DC ... 32 V DC
Temperature compensation (configurable)
42 mV/K
Deep discharge protection
19.2 V DC
Conductor cross section solid min.
0.2 mm²
Single conductor/terminal point, stranded, with ferrule, min.
0.5 mm²
Single conductor/terminal point, stranded, with ferrule, max.
16 mm²
Tightening torque max
0.6 Nm
Designation
CB scheme
Discharge in air
15 kV (Test Level 4)
Input
1 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040705
UNSPSC 19.0
39121011
Width
47 mm
Depth with alternative assembly
49 mm
Installation distance top/bottom (active, passive)
40 mm / 20 mm (POut ≤50 %)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Internal input fuse
no
Fixed backup threshold
22 V DC
Short-circuit-proof
yes
UPS connection in series
no
Battery technology
VRLA, VRLA-WTR, LI-ION
Charging time
202.5 h
Weight
0.7 kg
Life expectancy (electrolytic capacitors)
126720 h
Connection method
Screw connection
Conductor cross section AWG max.
12
EMC requirements for noise emission
EN 61000-6-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Additional text
DC, 60 s
Frequency
0 Hz
UNSPSC 18.0
39121011
UNSPSC 20.0
39121011
Installation height
≤ 4000 m
Degree of pollution
2
Reverse polarity protection
yes
UPS connection in parallel
no
Static Boost (IStat.Boost)
45 A
End-of-charge voltage
32 V DC
Nominal capacity (without additional charger)
7 Ah ... 100 Ah
Charge characteristic curve
IU0U
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Tightening torque, min
0.5 Nm
Standard designation
Safety extra-low voltage
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
300 A/m
Conducted interference
EN 61000-4-6
Criterion A
Normal operating behavior within the specified limits.
ETIM 7.0
EC000382
ECLASS 5.1
27242213
Installation distance top/bottom (active)
50 mm / 50 mm (POut ≥50% )
Ambient temperature (start-up type tested)
-40 °C
Electric strength, max.
35 V DC
Switch-over time
0 ms
Energy storage device connection in parallel
Yes, 5 (observe line protection)
Max. capacity
135 Ah
Buffer time
45 min. (38 Ah)
IQ-Technology
yes
Environmental protection directive
RoHS Directive 2011/65/EU
Conductor cross section flexible max.
2.5 mm²
Stripping length
6.5 mm
Standards/regulations
IEC 61010-1 (SELV)
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Power frequency magnetic field
EN 61000-4-8
ECLASS 10.0.1
27040705
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC000382
Conductor cross section AWG min.
30
EMC requirements for noise immunity
EN 61000-6-1
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 3 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
ECLASS 9.0
27040705
UNSPSC 13.2
39121004
UNSPSC 21.0
39121011
MTBF (IEC 61709, SN 29500)
> 1376000 h (25 °C)
Height
130 mm
Installation distance right/left (active, passive)
0 mm / 0 mm (POut ≤50 %)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Dynamic Boost (IDyn.Boost)
60 A (5 s)
Identification
IEC 61010-1
I/O/S
asymmetrical
Height with alternative assembly
130 mm
Installation distance right/left (passive)
0 mm / 0 mm (POut ≥50% )
Frequency range
50 Hz ... 60 Hz

Product condition