Welcome to Quotebeam
Nikki Gonzales
Bryan Obida
Nick Goetz

We are online

Monday - Friday 6AM - 6PM PST

2907076 Phoenix Contact UPS (DC)

Phoenix Contact 2907076 QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A
Phoenix Contact

Part#:2907076

Manufacturer:Phoenix Contact

Product Lifecycle:Active

Checking verified in-stock parts...

About the product: QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherCAT®), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 20 A, charging current: 5 A

About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.

Check out the 2907076 Phoenix Contact price in the box on the right side or send a quick quote.

2907076 Product Details

  • Height
    130 mm
  • Depth with alternative assembly
    42 mm
  • Installation distance top/bottom (active, passive)
    40 mm / 20 mm (POut ≤50 %)
  • Max. permissible relative humidity (operation)
    ≤ 95 % (at 25 °C, non-condensing)
  • Installation height
    ≤ 4000 m
  • Reverse polarity protection
    yes
  • Fixed backup threshold
    22 V DC
  • Switch-over time
    0 ms
  • Width
    40 mm
  • Installation distance right/left (active)
    5 mm / 5 mm (POut ≥50% )
  • Ambient temperature (start-up type tested)
    -40 °C
  • Climatic class
    3K3 (EN 60721)
  • Short-circuit-proof
    yes
  • Efficiency
    typ. 97 %
  • End-of-charge voltage (temperature-compensated)
    25 V DC ... 32 V DC
  • Charging time
    202.5 h
  • MTBF (IEC 61709, SN 29500)
    > 1172000 h (25 °C)
  • Single conductor/terminal point, stranded, with ferrule, max.
    4 mm²
  • Tightening torque max
    0.6 Nm
  • Designation
    CB scheme
  • Test field strength
    300 A/m
  • Signal
    1 kV (Test Level 2 - asymmetrical)
  • Surge voltage load (surge)
    EN 61000-4-5
  • Criterion B
    Temporary impairment to operational behavior that is corrected by the device itself.
  • ECLASS 5.1
    27242213
  • UNSPSC 19.0
    39121011
  • Installation distance right/left (passive)
    0 mm / 0 mm (POut ≥50% )
  • Height with alternative assembly
    130 mm
  • Degree of protection
    IP20
  • Degree of pollution
    2
  • Input voltage range
    18 V DC ... 30 V DC
  • Electric strength, max.
    35 V DC
  • UPS connection in parallel
    no
  • Energy storage device connection in parallel
    Yes, 5 (observe line protection)
  • Dynamic Boost (IDyn.Boost)
    30 A (5 s)
  • Nominal capacity (without additional charger)
    3 Ah ... 100 Ah
  • Charge characteristic curve
    IU0U
  • Life expectancy (electrolytic capacitors)
    192072 h
  • Conductor cross section solid min.
    0.2 mm²
  • Conductor cross section flexible min.
    0.2 mm²
  • Stripping length
    6.5 mm
  • EMC requirements for noise immunity
    EN 61000-6-1
  • Electromagnetic compatibility
    Conformance with EMC Directive 2014/30/EU
  • Low Voltage Directive
    Conformance with Low Voltage Directive 2014/35/EC
  • Input
    1 kV (Test Level 3 - symmetrical)
  • Conducted interference
    EN 61000-4-6
  • Depth
    125 mm
  • Installation distance top/bottom (passive)
    40 mm / 20 mm (POut ≥50% )
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Internal input fuse
    no
  • Voltage drop, input/output
    0.4 V DC
  • Output voltage range
    19 V DC ... 32 V DC
  • Switch-on time
    max. 3 s
  • No-load proof
    yes
  • Battery technology
    VRLA, VRLA-WTR, LI-ION
  • Charging current (configurable)
    5 A
  • Buffer time
    19 min. (12 Ah)
  • Environmental protection directive
    RoHS Directive 2011/65/EU
  • Single conductor/terminal point, stranded, with ferrule, min.
    0.2 mm²
  • Conductor cross section AWG max.
    12
  • Conductor cross section AWG min.
    30
  • Identification
    IEC 61010-1
  • Comments
    Criterion A
  • Output
    1 kV (Test Level 3 - symmetrical)
  • I/O/S
    asymmetrical
  • ECLASS 9.0
    27040705
  • Installation distance top/bottom (active)
    50 mm / 50 mm (POut ≥50% )
  • Energy storage device connection in series
    no
  • Selective Fuse Breaking (ISFB)
    120 A (15 ms)
  • Max. capacity
    135 Ah
  • Deep discharge protection
    19.2 V DC
  • Conductor cross section solid max.
    2.5 mm²
  • Discharge in air
    15 kV (Test Level 4)
  • Frequency range
    50 Hz ... 60 Hz
  • Additional text
    DC, 60 s
  • REACh SVHC
    Lead 7439-92-1
  • ETIM 6.0
    EC000382
  • UNSPSC 20.0
    39121011
  • UNSPSC 21.0
    39121011
  • Inflammability class in acc. with UL 94 (housing / terminal blocks)
    V0
  • Inrush current
    ≤ 8 A (≤ 4 ms)
  • UPS connection in series
    no
  • End-of-charge voltage
    32 V DC
  • Temperature sensor
    yes
  • Weight
    0.6 kg
  • Tightening torque, min
    0.5 Nm
  • EMC requirements for noise emission
    EN 61000-6-3
  • Standards/regulations
    IEC 61010-1 (SELV)
  • Contact discharge
    8 kV (Test Level 4)
  • Fast transients (burst)
    EN 61000-4-4
  • Frequency
    0 Hz
  • Criterion A
    Normal operating behavior within the specified limits.
  • ECLASS 10.0.1
    27040705
  • Width with alternative assembly
    123 mm
  • Installation distance right/left (active, passive)
    0 mm / 0 mm (POut ≤50 %)
  • Ambient temperature (operation)
    -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
  • Input voltage
    24 V DC
  • Static Boost (IStat.Boost)
    25 A
  • Temperature compensation (configurable)
    42 mV/K
  • IQ-Technology
    yes
  • Connection method
    Screw connection
  • Conductor cross section flexible max.
    2.5 mm²
  • Standard designation
    Safety extra-low voltage
  • Electrostatic discharge
    EN 61000-4-2
  • Electromagnetic HF field
    EN 61000-4-3
  • Voltage
    10 V (Test Level 3)
  • Power frequency magnetic field
    EN 61000-4-8
  • ECLASS 11.0
    27040705
  • ETIM 7.0
    EC000382
  • UNSPSC 13.2
    39121004
  • UNSPSC 18.0
    39121011

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.

Shipping and Delivery Worldwide

calculate cost and time at Checkout


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo