2906996 Phoenix Contact UPS (DC)

Product Details

• Weight0.5 kg
• Voltage
  10 V (Test Level 3)
• Width
  35 mm
• ECLASS 5.1
  27242213
• Width with alternative assembly
  123 mm
• Height with alternative assembly
  130 mm
• Installation distance right/left (passive)
  0 mm / 0 mm (POut ≥50% )
• Installation distance top/bottom (passive)
  40 mm / 20 mm (POut ≥50% )
• Degree of protection
  IP20
• Installation height
  ≤ 4000 m
• Electric strength, max.
  35 V DC (Protected against polarity reversal)
• Fixed backup threshold
  22 V DC
• Voltage drop, input/output
  0.3 V DC
• UPS connection in parallel
  no
• Output voltage range
  19 V DC ... 32 V DC (UOUT = UBAT - 0.3 V DC)
• End-of-charge voltage
  32 V DC
• Depth
  125 mm
• Height
  130 mm
• Depth with alternative assembly
  37 mm
• Installation distance top/bottom (active)
  50 mm / 50 mm (POut ≥50% )
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Internal input fuse
no
Switch-on time
max. 3 s
No-load proof
yes
Energy storage device connection in series
no
Efficiency
typ. 97 %
Battery technology
VRLA, VRLA-WTR, LI-ION
Buffer time
25 min. (3.4 Ah)
Charge characteristic curve
IU0U
Life expectancy (electrolytic capacitors)
224011 h
Connection method
Screw connection
Single conductor/terminal point, stranded, with ferrule, min.
0.2 mm²
Tightening torque max
0.6 Nm
Designation
CB scheme
EMC requirements for noise emission
EN 61000-6-3
Discharge in air
15 kV (Test Level 4)
Electromagnetic HF field
EN 61000-4-3
Output
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Conducted interference
EN 61000-4-6
ECLASS 9.0
27040705
ECLASS 11.0
27040705
UNSPSC 20.0
39121011
Installation distance right/left (active, passive)
0 mm / 0 mm (POut ≤50 %)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (EN 60721)
Degree of pollution
2
Input voltage range
18 V DC ... 30 V DC
Inrush current
≤ 7 A (≤ 4 ms)
Switch-over time
0 ms
Energy storage device connection in parallel
Yes, 5 (observe line protection)
Static Boost (IStat.Boost)
6.25 A
Selective Fuse Breaking (ISFB)
30 A (15 ms)
End-of-charge voltage (temperature-compensated)
25 V DC ... 32 V DC
IQ-Technology
yes
Environmental protection directive
RoHS Directive 2011/65/EU
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG min.
30
Single conductor/terminal point, stranded, with ferrule, max.
2.5 mm²
Stripping length
6.5 mm
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
300 A/m
Comments
Criterion A
Frequency
0 Hz
Power frequency magnetic field
EN 61000-4-8
ETIM 6.0
EC000382
UNSPSC 13.2
39121004
Installation distance right/left (active)
5 mm / 5 mm (POut ≥50% )
Installation distance top/bottom (active, passive)
40 mm / 20 mm (POut ≤50 %)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Ambient temperature (start-up type tested)
-40 °C
Input voltage
24 V DC
Reverse polarity protection
yes
Short-circuit-proof
yes
UPS connection in series
no
Dynamic Boost (IDyn.Boost)
10 A (5 s)
Max. capacity
40 Ah
Charging time
2.5 h (3.4 Ah)
Temperature compensation (configurable)
42 mV/K
Temperature sensor
yes
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
12
EMC requirements for noise immunity
EN 61000-6-1
Identification
IEC 61010-1
Contact discharge
8 kV (Test Level 4)
Input
1 kV (Test Level 3 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
Surge voltage load (surge)
EN 61000-4-5
Additional text
DC, 60 s
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
UNSPSC 21.0
39121011
Nominal capacity (without additional charger)
0.8 Ah ... 30 Ah
Charging current (configurable)
max. 1.5 A
MTBF (IEC 61709, SN 29500)
> 1189000 h (25 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Tightening torque, min
0.5 Nm
Standard designation
Safety extra-low voltage
Standards/regulations
IEC 61010-1 (SELV)
Electrostatic discharge
EN 61000-4-2
Frequency range
50 Hz ... 60 Hz
Fast transients (burst)
EN 61000-4-4
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040705
ETIM 7.0
EC000382
UNSPSC 19.0
39121011
UNSPSC 18.0
39121011