2906300 Phoenix Contact DC/DC Converters

2906300 Product Details

• Height
  90 mm
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 55° C derating : 2.5%/K)
• Degree of pollution
  2
• Current consumption
  0.19 A (350 V DC)
• Nominal output voltage
  24 V DC ±1 %
• Recommended breaker for input protection
  1 A (Characteristic gPV or comparable)
• Connection in series
  No
• Residual ripple
  < 20 mVPP (with nominal values)
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Net weight
  0.3 kg
• Insulation voltage input/output
  8 kV DC (type test)
• Assembly instructions
  alignable: 0 mm horizontally, 30 mm vertically
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section flexible max.
  2.5 mm²
• Depth
  84 mm
• Installation distance top/bottom
  30 mm / 30 mm (≤ 70 °C)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input voltage range
  350 V DC ... 900 V DC
Inrush current
< 1 A (typical)
Nominal output current (IN)
2.5 A (-25 °C ... 55 °C)
Feedback voltage resistance
< 35 V DC
Protection against overvoltage at the output (OVP)
< 35 V DC
Typical response time
< 1 s
Efficiency
> 90 %
Housing material
Polycarbonate
Connection method
Screw connection
Conductor cross section solid max.
2.5 mm²
Screw thread
M3
Standard – Safety extra-low voltage
IEC 60950-1 (SELV) and EN 60204-1 (PELV)
UL approvals
UL 1741
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Test field strength
10 V/m
Output
1 kV (Test Level 2 - symmetrical)
Conducted interference
EN 61000-4-6
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 10.0.1
27210901
Protection class
II
Foot latch material
POM (Polyoxymethylen)
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-1
Standard - Electrical safety
IEC 62109-1
Standard - Safe isolation
DIN VDE 0100-410
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Discharge in air
8 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
Voltage dips
EN 61000-4-11
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242213
UNSPSC 13.2
39121004
UNSPSC 19.0
39121004
Width
55 mm
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Degree of protection
IP20
Ambient temperature (start-up type tested)
-40 °C
Climatic class
3K3 (in acc. with EN 60721)
Dielectric strength maximum
≤ 1050 V DC
Input voltage range
300 V DC ... 1000 V DC
Derating
55 °C ... 70 °C (2.5%/K)
Connection in parallel
Yes, for redundancy and increased capacity
Output power
60 W
Maximum power dissipation in no-load condition
< 0.5 W
Power loss nominal load max.
< 6.5 W
MTBF (IEC 61709, SN 29500)
> 1160000 h (40 °C)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Stripping length
8 mm
Standard - Safety of power converters for use in photovoltaic power systems
IEC 62109-1
Electrostatic discharge
EN 61000-4-2
Frequency range
10 kHz ... 80 MHz
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27210901
ECLASS 6.0
27049005
ETIM 6.0
EC002046
Conductor cross section AWG max.
14
EMC requirements for noise emission
EN 61000-6-3
Mains variation/undervoltage
EN 61000-4-11
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Contact discharge
6 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 9.0
27210901

Product condition