2906201 Phoenix Contact Electrical Measuring & Monitoring Instruments

2906201 Product Details

• Number of outputs
  1
• Min. switching current
  100 µA
• PWM output: min. load
  12 mA ≤ (UL / RL) ≤ 100 mA
• Step response (0–99%)
  120 ms (15 Hz sample rate)
• Degree of protection
  IP20 (not assessed by UL)
• Voltage input signal
  0 V ... 10 V (via DIP switch)
• Input resistance current input
  approx. 50 Ω (+0.7 V for test diode)
• Height
  109.81 mm
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Configurable/programmable
  Yes
• Depth
  119.2 mm
• Maximum altitude
  ≤ 2000 m
• Current input signal
  0 mA ... 20 mA (via DIP switch)
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27210100
• ETIM 4.0
  EC002653
• Number of inputs
  1
• max. input voltage
  12 V
• Max. switching current
  100 mA (30 V DC)
• Frequency output: signal
  0 Hz ... 10 kHz (via DIP switch)
Color
gray
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Width
6.2 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Certificate
DNV GL TAA000021E
EMC
A
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27210100
UNSPSC 20.0
39121008
UNSPSC 19.0
39121008
Output name
Frequency output / switching output
Frequency output: min. load
4 mA ≤ (UL / RL) ≤ 100 mA
Nominal supply voltage
24 V DC
Stripping length
10 mm
Maximum temperature coefficient
< 0.01 %/K
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Ambient temperature (operation)
-40 °C ... 70 °C
Max. input current
24 mA
Conductor cross section AWG
24 ... 12 (flexible)
ECLASS 11.0
27210120
ECLASS 6.0
27210100
Minimum switching voltage
1 V DC
Screw thread
M3
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
No. of channels
1
Overvoltage category
II
Electromagnetic compatibility
Conformance with EMC directive
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
DNV GL-Vibration
A
Temperature
B
Humidity
B
Connection method
Screw connection
Temperature coefficient, typical
0.01 %/K
Housing material
PBT
DNV GL-Temperature
B
DNV GL-Humidity
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 10.0.1
27210120
ETIM 6.0
EC002653
ECLASS 9.0
27210120
UNSPSC 21.0
39121008
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Identification
UL 508 Listed
Typical current consumption
27 mA (12 V DC)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
UL, USA/Canada
UL 508 Listed
PWM output: signal
15.6 kHz (10 bits, via DIP switch)
Rated insulation voltage
300 V (effective)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
UNSPSC 13.2
39121008
DNV GL-EMC
A
ECLASS 4.0
27210100
UNSPSC 18.0
39121008
ETIM 7.0
EC002653
ECLASS 5.1
27210100
ECLASS 7.0
27210120
Designation
Shipbuilding approval
Degree of pollution
2
Conformance
CE-compliant
Torque
0.5 Nm ... 0.6 Nm
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
ATEX
 II 3 G Ex nA IIC T4 Gc X
Mounting position
any
Vibration
A
Input resistance of voltage input
> 120 kΩ
Power consumption
≤ 350 mW (9.6 V DC)
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Maximum switching voltage
30 V DC
Overrange/underrange
Can be set (via software)
Load current maximum
100 mA
Noise emission
EN 61000-6-4

Product condition