2906165 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2906165
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Limit value switch with Ex i input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, Push-in connectio
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2906165 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 12.5 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Depth 114.5 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Status display Green LED (supply voltage, PWR)
- Designation Systematic Capability
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- Input voltage Ui 30 V (Current and voltage input)
- Height 116 mm
- Degree of protection IP20
- Signal input Intrinsically safe
- Current input signal 0.2 mA ... 20 mA
- Contact type 1 changeover contact
- Contact material AgSnO2, hard gold-plated
- Typical current consumption 38 mA (24 V DC)
- Power consumption ≤ 1.2 W
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Maximum transmission error 0.1 %
- Maximum temperature coefficient 0.01 %/K
- Interference emission EN 61000-6-4
- Housing material PA 6.6-FR
- Input power Pi 900 mW (Current and voltage input)
- Max. internal inductance Li negligible
- Identification 3
- Vibration A
- ECLASS 10.0.1 27210120
- ECLASS 5.1 27210100
- ETIM 6.0 EC002653
- Ambient temperature (operation) -20 °C ... 65 °C (Any mounting position)
- Voltage input signal 0.1 V ... 10 V
- Switching hysteresis off: approx. 0.5 %, on: approx. 1 %
- Mechanical service life ≤ 107 cycles
- Max. current consumption 90 mA (10 V DC)
- Stripping length 8 mm
- Connection name Test socket
- Max. diameter 2 mm
- Overvoltage category II
- Rated insulation voltage 300 Vrms
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Input current Ii 120 mA (Current and voltage input)
- Max. output power Po 0 mW (Current input)
- Conformance CE-compliant, additionally EN 61326
- ATEX II (1) G [Ex ia Ga] IIC
- Certificate TÜV Rheinland 968/FSP 1481.00/17
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27210100
- ECLASS 9.0 27210120
- Maximum altitude ≤ 2000 m
- Input resistance of voltage input > 100 kΩ
- Output name Relay output
- Nominal supply voltage 24 V DC
- Group IIC
- UL, USA/Canada UL applied for
- Humidity B
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 11.0 27210120
- ECLASS 6.0 27210100
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Line fault detection Break U < 50 mV, I < 0.1 mA
- Input resistance current input < 28 Ω
- Max. switching current ≤ 4 A AC (cos phi = 1)
- Supply voltage range 9.6 V DC ... 30 V DC (12 V DC ... 24 V DC (-20 % ... +25 %))
- Power dissipation < 0.9 W
- Connection method Push-in connection
- Conductor cross section AWG 24 ... 14
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 4.0 27210100
- ECLASS 7.0 27210120
- ETIM 7.0 EC002653
- Max. output voltage Uo 0 V DC (Current input)
- Safety-related maximum voltage Um 253 V AC
- Standards/regulations GB 3626.20
- Additional text two-channel
- Temperature B
- EMC A
- ECLASS 5.0 27210100
- ETIM 4.0 EC002653
- Degree of pollution 2
- Max. external capacitance Co 35 µF
- Step response (0–99%) ≤ 22 ms
- Electromagnetic compatibility Conformance with EMC directive
- Max. output current Io 0 mA (Current input)
- Max. external inductivity Lo 1 mH
- Noise emission EN 61000-6-4
- IECEx [Ex ia Ga] IIC
- Max. internal capacitance Ci 75 nF (for current input)
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
