2906164 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2906164
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Limit value switch with Ex i input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, screw connection.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2906164 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Width 12.5 mm
- Maximum altitude ≤ 2000 m
- Current input signal 0.2 mA ... 20 mA
- Switching hysteresis off: approx. 0.5 %, on: approx. 1 %
- Mechanical service life ≤ 107 cycles
- Supply voltage range 9.6 V DC ... 30 V DC (12 V DC ... 24 V DC (-20 % ... +25 %))
- Screw thread M3
- Conductor cross section AWG 24 ... 14
- Maximum transmission error 0.1 %
- Status display Green LED (supply voltage, PWR)
- Housing material PA 6.6-FR
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Max. internal inductance Li negligible
- Max. output current Io 0 mA (Current input)
- Noise emission EN 61000-6-4
- Certificate TÜV Rheinland 968/FSP 1481.00/17
- Vibration A
- Depth 114.5 mm
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Input resistance of voltage input > 100 kΩ
- Input resistance current input < 28 Ω
- Contact material AgSnO2, hard gold-plated
- Power dissipation < 0.9 W
- Connection method Screw connection
- Max. diameter 2 mm
- Overvoltage category II
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Input voltage Ui 30 V (Current and voltage input)
- Max. output voltage Uo 0 V DC (Current input)
- Group IIC
- Identification 3
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27210100
- ECLASS 7.0 27210120
- ETIM 4.0 EC002653
- Ambient temperature (operation) -20 °C ... 65 °C (Any mounting position)
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Signal input Intrinsically safe
- Max. switching current ≤ 4 A AC (cos phi = 1)
- Power consumption ≤ 1.2 W
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Degree of pollution 2
- Electromagnetic compatibility Conformance with EMC directive
- Input current Ii 120 mA (Current and voltage input)
- Max. output power Po 0 mW (Current input)
- Additional text two-channel
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 11.0 27210120
- ETIM 7.0 EC002653
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Voltage input signal 0.1 V ... 10 V
- Output name Relay output
- Contact type 1 changeover contact
- Max. current consumption 90 mA (10 V DC)
- Stripping length 7 mm
- Torque 0.5 Nm ... 0.6 Nm
- Maximum temperature coefficient 0.01 %/K
- Interference emission EN 61000-6-4
- Rated insulation voltage 300 Vrms
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- Max. internal capacitance Ci 75 nF (for current input)
- Safety-related maximum voltage Um 253 V AC
- Max. external inductivity Lo 1 mH
- Temperature B
- ECLASS 10.0.1 27210120
- ECLASS 4.0 27210100
- ECLASS 5.0 27210100
- ECLASS 5.1 27210100
- Height 112.5 mm
- Degree of protection IP20
- Line fault detection Break U < 50 mV, I < 0.1 mA
- Typical current consumption 38 mA (24 V DC)
- Nominal supply voltage 24 V DC
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Connection name Test socket
- Step response (0–99%) ≤ 22 ms
- Designation Systematic Capability
- Input power Pi 900 mW (Current and voltage input)
- Max. external capacitance Co 35 µF
- Standards/regulations GB 3626.20
- Humidity B
- EMC A
- ECLASS 6.0 27210100
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 9.0 27210120
- ETIM 6.0 EC002653
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
