2905909 Phoenix Contact UPS (DC)

2905909 Product Details

• Ambient temperature (operation)
  0 °C ... 40 °C
• Degree of pollution
  2
• Climatic class
  3K3 (in acc. with EN 60721)
• Conductor cross section solid min.
  0.2 mm²
• Conductor cross section AWG min.
  24
• Power factor (cos phi)
  0.8
• Switch-over time
  < 10 ms
• Nominal output current (IN)
  3 A (750 VA)
• Frequency (after automatic detection in mains operation)
  50 Hz
• Hood version
  PC + ABS
• Input fuse
  10 A 400 V gRL
• Charging time
  7 h
• Depth
  136 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Maximum altitude
  ≤ 3000 m (> 2000 m, observe derating)
• Installation distance right/left
  0 mm / 0 mm
• Vibration (operation)
  5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)
• Frequency range
  0.15 MHz ... 80 MHz
• Permissible backup fuse
  B6 B10 B16
• Conductor cross section flexible max.
  1.5 mm²
Conductor cross section AWG max.
16
Nominal output voltage (UN)
230 V AC
MTBF (IEC 61709, SN 29500)
> 206000 h (40 °C)
Type of housing
DX51D+AZ (steel sheet / Galvalume)
Capacity
3.4 Ah
Accumulator type
2x Panasonic UP-VW1220P1
Latest startup
6 Months (0 °C ... 20 °C)
Buffer period
20 min. (100 W)
Switching output
Transistor output, active
High signal
Open (> 200 kΩ between bat. start and SGnd)
Interface
MINI-USB type B
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electrostatic discharge
EN 61000-4-2
Comments
Criterion A
Output
1 kV (Test Level 2 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Voltage
10 V
Frequency
50 Hz
ECLASS 4.0
27040600
ECLASS 5.0
27040600
ECLASS 7.0
27040602
ECLASS 6.0
27040600
UNSPSC 20.0
39121011
Height
170 mm
Ambient temperature (storage/transport)
-15 °C ... 40 °C (with charged energy storage device)
Shock
20g in all directions (EN 60068-2-27)
Input voltage range
184 V AC ... 264 V AC
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Apparent power
750 VA
Rated Power (Real Power)
600 W
Form of output voltage
Pure sine
Efficiency
> 95 % (with charged energy storage device)
Degree of protection
IP20
Protection class
I
Battery technology
Lead rechargeable battery module
Weight
5.7 kg
Service life
6 Years ... 9 Years (20 °C)
Can be extended with external battery
1x 24 V 3.4 Ah
Continuous load current
≤ 20 mA
Designation
Remote
UPS connection in series
no
UPS connection in parallel
no
Electromagnetic HF field
EN 61000-4-3
Discharge in air
8 kV (Test Level 3)
Test field strength
100 A/m
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 3
ECLASS 10.0.1
27040705
ECLASS 5.1
27040600
ETIM 7.0
EC000382
UNSPSC 19.0
39121011
UNSPSC 21.0
39121011
Width
210 mm
Max. permissible relative humidity (operation)
≤ 95 % (25 °C, non-condensing)
Nominal input voltage
230 V AC
Current consumption
3 A
Conductor cross section solid max.
1.5 mm²
Stripping length
8 mm
Crest factor
2.8
Classification according to IEC 62040-3
VFD-SS-311
Battery fuse
40 A, 32 V
Output voltage
24 V (SELV)
Status display
LED red
Low signal
Connection to SGnd with < 2.7 kΩ
Standard uninterruptible power supply systems
EN 62040-1
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Contact discharge
6 kV (Test Level 3)
Input
1 kV (Test Level 2 - symmetrical)
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Signal
1 kV (Test Level 2 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040705
ECLASS 4.1
27040600
ECLASS 9.0
27040705
ETIM 6.0
EC000382
UNSPSC 18.0
39121011
UNSPSC 13.2
39121011

Product condition