2905633 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2905633
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Universally configurable temperature limit value switch with N/O relay output for the connection of 2, 3, and 4-conductor resistance thermometers and thermocouples. Configurable via DIP switch or software. Push-in connection technology
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2905633 Phoenix Contact price in the box on the right side or send a quick quote.
2905633 Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Available input sources Thermocouples
- Linear mV signal range -500 mV ... 500 mV
- Nominal supply voltage 24 V DC
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Max. permissible overall conductor resistance ≤ 25 Ω (Per line, RTD in 3- or 4-conductor technology)
- Electromagnetic compatibility Conformance with EMC directive
- Mounting position any
- Identification UL 508 Listed
- Vibration A
- China RoHS Environmentally Friendly Use Period = 50 years
- Degree of protection IP20 (not assessed by UL)
- Sensor input current approx. 200 µA
- Limiting continuous current 6 A AC
- Internal hysteresis can be set freely via software
- Width 6.2 mm
- Sensor types (RTD) that can be used Pt, Ni, Cu sensors
- Power consumption 570 mW
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Depth 119.2 mm
- Connection technology 2-, 3-, 4-conductor
- Output name Relay output
- Mechanical service life 2x 107 cycles
- Max. switching current 6 A AC (250 V AC)
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Switching point accuracy < 0.1 %
- Designation Shipbuilding approval
- ECLASS 4.1 27210100
- ECLASS 7.0 27210122
- Contact type 1 N/O contact
- No. of channels 1
- Maximum temperature coefficient 0.01 %/K
- Degree of pollution 2
- Housing material PBT
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Humidity B
- ECLASS 4.0 27210100
- ECLASS 5.1 27210100
- ECLASS 9.0 27210122
- ETIM 7.0 EC002654
- Height 109.81 mm
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Sensor types that can be used (TC) B, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
- Min. switching current 100 mA (12 V DC)
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- Conductor cross section solid 0.2 mm² ... 2.5 mm² (with ferrule)
- Status display Yellow LED (switching output)
- Overvoltage category II
- Noise emission EN 61000-6-4
- Color gray
- REACh SVHC Lead 7439-92-1
- ECLASS 10.0.1 27210122
- ETIM 4.0 EC002654
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Linear resistance measuring range 0 Ω ... 4000 Ω
- Maximum switching voltage 250 V AC
- Typical current consumption 44 mA (12 V DC)
- Conductor cross section AWG 24 ... 12 (flexible)
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Rated insulation voltage 300 V
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- EMC A
- ECLASS 11.0 27210122
- ECLASS 5.0 27210100
- Ambient temperature (operation) -40 °C ... 70 °C
- Contact material AgSnO2, hard gold-plated
- Setting range of the response delay 0 s ... 10 s (can be set freely via software)
- Connection method Push-in connection
- Stripping length 10 mm
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Certificate DNV GL TAA000021E
- Temperature B
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 6.0 27210100
- ETIM 6.0 EC002654
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2905633
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨