2905577 Phoenix Contact Electrical Measuring & Monitoring Instruments

2905577 Product Details

• Height
  93.1 mm
• Input voltage limitation
  < 2 V (20 mA)
• Output name
  Current output
• Transmission Behavior
  1:1 to input signal
• Conductor cross section AWG
  26 ... 12
• Limit frequency (3 dB)
  > 175 Hz
• Protective circuit
  Transient protection
• Noise emission
  EN 61000-6-4
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• Standards/regulations
  EN 61000-4-6
• Certificate
  DNV GL TAA000020N
• Vibration
  B
• ECLASS 11.0
  27210120
• ECLASS 5.0
  27210100
• UNSPSC 13.2
  39121008
• UNSPSC 20.0
  39121008
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Number of inputs
  1
• Load/output load current output
  ≤ 800 Ω (at 20 mA)
Nominal supply voltage
24 V DC
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Maximum transmission error
≤ 0.1 % (of final value)
Step response (10-90%)
< 2 ms
Degree of pollution
2
Color
green
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Designation
Shipbuilding approval
EMC
A
ECLASS 10.0.1
27210120
ECLASS 4.1
27210100
ETIM 7.0
EC002653
Ambient temperature (operation)
-20 °C ... 60 °C
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Max. input current
20 mA
Current output signal
4 mA ... 20 mA
Screw thread
M3
No. of channels
1
Overvoltage category
II
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Identification
UL 508 Listed
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ETIM 4.0
EC002653
ECLASS 7.0
27210120
UNSPSC 19.0
39121008
Width
6.2 mm
Depth
101.2 mm
Maximum altitude
≤ 2000 m
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Degree of protection
IP20
Current input signal
4 mA ... 20 mA
Number of outputs
1
Ripple
< 20 mVrms
Supply voltage range
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Power consumption
< 600 mW (at 24 V DC)
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Temperature coefficient, typical
< 0.01 %/K
Electrical isolation
Basic insulation according to EN 61010
Rated insulation voltage
50 V AC/DC
Electromagnetic compatibility
Conformance with EMC directive
Assembly instructions
To bridge the supply voltage, the DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Temperature
B
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27210100
ETIM 6.0
EC002653
UNSPSC 21.0
39121008
Stripping length
12 mm
Connection method
Screw connection
Maximum temperature coefficient
< 0.01 %/K
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Housing material
PBT
Typical deviation from the measuring range final value
3 %
Humidity
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 6.0
27210100
ECLASS 9.0
27210120
UNSPSC 18.0
39121008

Product condition