2905139 Phoenix Contact Electrical Safety Devices
Part#:2905139
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 3 A output current, with adjustable overload shutdown, emergency stop function to SIL 3 / PL e and push-in connection, DIN rail connector provided.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2905139 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Operate threshold > 33 A
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Type of protection Surge protection
- Switching level < 5 V DC (For EMERGENCY STOP)
- Typical turn-off time < 30 ms
- Load current range 180 mA ... 3 A (see to derating)
- Ambient temperature (operation) -5 °C ... 60 °C (observe derating)
- Degree of protection IP20
- Note The enable input is compatible with signals with blanking (semiconductor output signals with test pulse with max. 3 ms duration),unblanking pulses of max. 4 ms are tolerated without adversely affecting the safety function.
- Rated actuating voltage UC 24 V DC
- Rated operating voltage Ue 500 V AC
- Mains frequency 50/60 Hz
- Response time < 0.5 s
- Maximum power dissipation 4.1 W
- Connection method Push-in connection
- Stripping length 10 mm
- Conductor cross section AWG 24 ... 14
- SCCR 100 kA (480 V AC (fuse: 30 A class CC/30 A class J (high fault)))
- FLA 3 A (480 V AC)
- Horsepower ratings 0.5 hp (208 V AC)
- Switching threshold 9.6 V (“0” signal)
- Operating voltage range 42 V AC ... 550 V AC
- Depth 114 mm
- Rated control circuit supply voltage US 24 V DC
- Input name Enable input
- Cooling time 20 min. (for auto reset)
- Switching frequency ≤ 2 Hz (Load-dependent)
- Minimum power dissipation 0.88 W
- Operating voltage display Green LED
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Certificate NLDX.E228652
- Identification ≤ 3
- ECLASS 11.0 27370905
- ECLASS 5.1 27024000
- ETIM 3.0 EC001037
- UNSPSC 18.0 25173902
- UNSPSC 19.0 25173902
- Height 107.5 mm
- Control supply voltage range 19.2 V DC ... 30 V DC
- Rated actuating current IC 7 mA
- Rated operating current Ie 3 A (AC-51)
- Leakage current 0 mA
- Mounting position vertical (horizontal DIN rail, motor output below)
- Operating mode 100% operating factor
- Indication Red LED
- Overvoltage category III
- Designation Category (ISO 13849)
- Standards/regulations IEC 60947-1
- Category code NLDX / NRNT
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27021100
- ECLASS 9.0 27370905
- ETIM 4.0 EC001037
- ETIM 6.0 EC001037
- UNSPSC 21.0 25173902
- Width 22.5 mm
- Maximum altitude ≤ 2000 m
- Rated control supply current IS 60 mA
- Triggering voltage range 19.2 V DC ... 30 V DC
- Output name AC output
- Trigger characteristic in acc. with IEC 60947-4-2 Class 10
- Motor starter type Reversing starter
- Mounting type DIN rail mounting
- Status display Yellow LED
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Degree of pollution 2
- Additional text Safe shutdown
- Assembly instructions alignable, for spacing see derating
- Connection name Load circuit
- Rated surge voltage 6 kV
- Rated insulation voltage 550 V
- Insulation Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
- Group installation 20 A (class RK5, SCCR 5kA (480 V AC), #24 - 14 AWG max. solid and stranded)
- ECLASS 10.0.1 27370905
- ECLASS 4.1 27021100
- ETIM 2.0 EC001037
- UNSPSC 13.2 25173902
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27024000
- ECLASS 6.0 27024000
- ECLASS 7.0 27024002
- ETIM 7.0 EC001037
- UNSPSC 20.0 25173902
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
