2905028 Phoenix Contact Electrical Measuring & Monitoring Instruments

2905028 Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Voltage output signal
  0 V ... 10 V (via DIP switch)
• Height
  109.81 mm
• Number of inputs
  1
• Current input signal
  0 mA ... 20 mA (via DIP switch)
• Current output signal
  0 mA ... 20 mA (via DIP switch)
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Conductor cross section AWG
  24 ... 12 (flexible)
• Degree of pollution
  2
• Overvoltage category
  II
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
• Typical deviation from the measuring range final value
  2.8 %
• UL, USA/Canada
  UL 508 Listed
• Temperature
  B
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Maximum altitude
  ≤ 2000 m
• Configurable/programmable
  Yes
• Number of outputs
  2
• Max. output voltage
  approx. 12.3 V
• Ripple
  < 20 mVPP (at 600 Ω)
Stripping length
10 mm
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Rated insulation voltage
300 V
Width
6.2 mm
Electromagnetic compatibility
Conformance with EMC directive
Housing material
PBT
Mounting position
any
Designation
Shipbuilding approval
DNV GL-Temperature
B
Certificate
DNV GL TAA000021E
ECLASS 4.0
27210100
ETIM 4.0
EC002653
UNSPSC 6.01
30211506
Max. input current
24 mA
Short-circuit current
≤ 25 mA
Typical current consumption
55 mA (24 V DC)
Maximum transmission error
0.05 % (of final value)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Noise emission
EN 61000-6-4
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Standards/regulations
EN 61000-4-6
DNV GL-Humidity
B
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
DNV GL-EMC
A
Ambient temperature (storage/transport)
-40 °C ... 85 °C
max. input voltage
12 V
Input resistance current input
approx. 50 Ω (+0.7 V for test diode)
Load/output load current output
≤ 600 Ω (per channel)
Nominal supply voltage
24 V DC
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Maximum temperature coefficient
0.01 %/K
Color
gray
Degree of protection
IP20 (not assessed by UL)
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Voltage input signal
0 V ... 10 V (via DIP switch)
Input resistance of voltage input
> 120 kΩ
Max. output current
24.6 mA
Load/output load voltage output
≥ 10 kΩ
Power consumption
1.5 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
No. of channels
2
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
DNV GL-Vibration
A
Identification
UL 508 Listed
Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27210100
UNSPSC 12.01
39121008
UNSPSC 18.0
39121008
ECLASS 10.0.1
27210120
Conformance
CE-compliant
ATEX
 II 3 G Ex nA IIC T4 Gc X
EMC
A
ECLASS 5.1
27210100
UNSPSC 11
39121008
Humidity
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210120
ETIM 6.0
EC002653
UNSPSC 7.0901
39121008
UNSPSC 20.0
39121008
UNSPSC 13.2
39121008
REACh SVHC
Lead 7439-92-1
ECLASS 4.1
27210100
ECLASS 7.0
27210120
ETIM 7.0
EC002653
UNSPSC 21.0
39121008
ECLASS 5.0
27210100
ECLASS 9.0
27210120
UNSPSC 19.0
39121008

Product condition