2905009 Phoenix Contact DC/DC Converters

Product Details

• Height
  130 mm
• Depth with alternative assembly
  51 mm
• Installation distance top/bottom (active)
  50 mm / 50 mm (≤ 70 °C)
• Degree of protection
  IP20
• Degree of pollution
  2
• Width with alternative assembly
  122 mm
• Installation distance right/left (active)
  15 mm / 15 mm (≤ 70 °C)
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Inrush current
  < 9 A (typical)
• Protective circuit/component
  Varistor
• Selective Fuse Breaking (ISFB)
  60 A (12 ms)
• Feedback voltage resistance
  35 V DC
• Connection in parallel
  Yes, for redundancy and increased capacity
• Max. capacitive load
  unlimited
• MTBF (IEC 61709, SN 29500)
  > 1349000 h (25 °C)
• Insulation voltage input/output
  1.5 kV (type test)
• Conductor cross section AWG min.
  24
• EMC requirements for noise emission
  EN 61000-6-3
• Standard – Safety extra-low voltage
  EN 60950-1 (SELV)
Discharge in air
15 kV (Test Level 4)
Comments
Criterion A
Conducted interference
EN 61000-4-6
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27210900
ECLASS 5.1
27210900
UNSPSC 20.0
39121041
Conductor cross section solid max.
2.5 mm²
Connection method
Screw connection
Conductor cross section flexible max.
2.5 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.1
27210900
ECLASS 7.0
27210901
ETIM 6.0
EC002046
UNSPSC 21.0
39121041
Width
48 mm
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Ambient temperature (start-up type tested)
-40 °C
Climatic class
3K3 (in acc. with EN 60721)
Nominal input voltage range
60 V DC ... 72 V DC
Type of protection
Transient surge protection
Input fuse
10 A 150 V DC (internal (device protection))
Nominal output current (IN)
10 A (-40 °C ... 60 °C)
Protection against overvoltage at the output (OVP)
< 35 V DC
Power loss nominal load max.
24 W (UIN 60 V DC)
Efficiency
> 91 % (UIN 60 V DC / UOUT 24 V DC)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section flexible min.
0.2 mm²
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Contact discharge
8 kV (Test Level 4)
Input
2 kV (Test Level 4 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27210901
ECLASS 9.0
27210901
UNSPSC 18.0
39121041
UNSPSC 19.0
39121041
Depth
125 mm
Height with alternative assembly
130 mm
Installation distance top/bottom
50 mm / 50 mm (≤ 70 °C)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Current consumption
5.6 A (60 V DC)
Mains buffering time
typ. 10 ms (60 V DC)
Nominal output voltage
24 V DC ±1 %
Derating
60 °C ... 70 °C (2.5%/K)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Residual ripple
< 20 mVPP
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
Protection class
I
Conductor cross section AWG max.
12
EMC requirements for noise immunity
EN 61000-6-1
Rail applications
EN 50121-4
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
10 V/m (Test Level 3)
Output
1 kV (Test Level 3 - symmetrical)
ECLASS 10.0.1
27210901
ECLASS 6.0
27210900
ETIM 7.0
EC002046
Input voltage range
42 V DC ... 96 V DC
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
POWER BOOST (IBoost)
12.5 A (-40°C ... 40°C permanent, UOUT = 24 V DC )
Connection in series
yes
Active current limitation
18 A
Maximum power dissipation in no-load condition
4 W (UIN 60 V DC)
Net weight
1 kg
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Stripping length
7 mm
Screw thread
M3
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL/C-UL listed UL 508
Frequency range
0.9 MHz ... 80 MHz
Fast transients (burst)
EN 61000-4-4
Signal
1 kV (Test Level 2 - asymmetrical)
I/O/S
asymmetrical
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 4.0
27210900
UNSPSC 13.2
39121041