2905008 Phoenix Contact DC/DC Converters

Product Details

• Height
  130 mm
• Installation distance top/bottom
  50 mm / 50 mm (≤ 70 °C)
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Degree of pollution
  2
• Inrush current
  < 6 A (typical)
• Nominal output current (IN)
  5 A (-25 °C ... 60 °C)
• Connection in series
  yes
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Width
  48 mm
• Height with alternative assembly
  130 mm
• Degree of protection
  IP20
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage range
  48 V DC
• POWER BOOST (IBoost)
  6.25 A (-25 °C ... 40 °C permanent, UOUT = 48 V DC )
• Derating
  60 °C ... 70 °C (2.5%/K)
• Selective Fuse Breaking (ISFB)
  30 A (12 ms)
• Protection against overvoltage at the output (OVP)
  < 60 V DC
• Residual ripple
  < 20 mVPP
• Net weight
  0.9 kg
• Conductor cross section flexible min.
  0.2 mm²
Screw thread
M3
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
Frequency range
0.1 MHz ... 80 MHz
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 6.0
27210900
ETIM 7.0
EC002046
Installation distance right/left (active)
15 mm / 15 mm (≤ 70 °C)
Ambient temperature (start-up type tested)
-40 °C
Input voltage range
30 V DC ... 60 V DC
Current consumption
7 A (48 V, IBOOST)
Type of protection
Transient surge protection
Protective circuit/component
Varistor
Active current limitation
7 A
Efficiency
> 93 %
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Rail applications
EN 50121-4
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m (Test Level 3)
Input
1 kV (Test Level 3 - asymmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27210900
ECLASS 9.0
27210901
UNSPSC 20.0
39121041
Width with alternative assembly
122 mm
Installation distance right/left
0 mm / 0 mm (≤ 70 °C)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input fuse
15 A (internal (device protection))
Setting range of the output voltage (USet)
30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted)
Feedback voltage resistance
60 V DC
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid max.
2.5 mm²
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Surge voltage load (surge)
EN 61000-4-5
Voltage
10 V (Test Level 3)
ECLASS 4.0
27210900
UNSPSC 13.2
39121041
UNSPSC 21.0
39121041
Depth
125 mm
Depth with alternative assembly
51 mm
Installation distance top/bottom (active)
50 mm / 50 mm (≤ 70 °C)
Climatic class
3K3 (in acc. with EN 60721)
Mains buffering time
typ. 10 ms (48 V DC)
Nominal output voltage
48 V DC ±1 %
Connection in parallel
Yes, for redundancy and increased capacity
Max. capacitive load
unlimited
Power loss nominal load max.
20 W
Insulation voltage input/output
1.5 kV (type test)
Connection method
Pluggable screw connection
Conductor cross section AWG max.
12
EMC requirements for noise emission
EN 61000-6-3
UL approvals
UL/C-UL listed UL 508
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Comments
Criterion A
Signal
1 kV (Test Level 2 - asymmetrical)
I/O/S
asymmetrical
ECLASS 10.0.1
27210901
ECLASS 4.1
27210900
ECLASS 7.0
27210901
UNSPSC 18.0
39121041
Maximum power dissipation in no-load condition
2.7 W
Protection class
III
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section AWG min.
24
Stripping length
7 mm
EMC requirements for noise immunity
EN 61000-6-1
Standard - Safe isolation
DIN VDE 0100-410
Discharge in air
15 kV (Test Level 4)
Electromagnetic HF field
EN 61000-4-3
Criterion A
Normal operating behavior within the specified limits.
ECLASS 11.0
27210901
ECLASS 5.1
27210900
ETIM 6.0
EC002046
UNSPSC 19.0
39121041