2902849 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902849 Product Details

• Temperature
  B
• EMC
  B
• ECLASS 10.0.1
  27210129
• ETIM 3.0
  EC001446
• Height
  93.1 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Linear resistance measuring range
  0 Ω ... 4000 Ω (Minimum measuring span: 10% of the selected measuring range)
• Connection technology
  2-, 3-, 4-conductor
• Voltage output signal
  0 V ... 10 V
• Max. output current
  24.6 mA
• Load/output load voltage output
  10 kΩ
• Power consumption
  ≤ 700 mW (at IOUT = 20 mA, 9.6 V DC, load 500 Ω)
• Connection method
  Screw connection
• ECLASS 5.0
  27200200
• ETIM 2.0
  EC001446
• UNSPSC 6.01
  30211506
• UNSPSC 7.0901
  39121008
• UNSPSC 19.0
  41112105
• Width
  6.2 mm
Depth
101.2 mm
Maximum altitude
≤ 2000 m
Configurable/programmable
Yes
Sensor types (RTD) that can be used
Pt, Ni, Cu sensors
Number of outputs
1
Max. output voltage
approx. 12.3 V
Ripple
< 20 mVPP
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Stripping length
12 mm
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Maximum temperature coefficient
0.01 %/K
Protective circuit
Transient protection
Degree of pollution
2
Noise emission
EN 61000-6-4
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-20 °C ... 65 °C
Degree of protection
IP20
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Temperature measuring range
-200 °C ... 850 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 850°C via DIP switches)
Sensor input current
approx. 200 µA
Current output signal
0 mA ... 20 mA
Load/output load current output
500 Ω (at 20 mA)
Typical current consumption
< 27 mA (at 24 V DC)
Screw thread
M3
Transmission error resistance thermometer
0.1 % * 350 K / set measuring range; 0.1 % > 350 K (Pt/Ni)
Conductor cross section AWG
26 ... 12
Status display
LED red
Overvoltage category
II
Electromagnetic compatibility
Conformance with EMC directive
Mounting position
any
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Certificate
DNV GL TAA00002R0
Vibration
B
ECLASS 6.0
27200200
ECLASS 5.1
27200200
ETIM 6.0
EC002919
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 21.0
41112105
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Transmission error resistance-type sensor
2 Ω
Electrical isolation
Basic insulation according to EN 61010
Rated insulation voltage
50 V AC/DC
Test voltage, input/output/supply
1.5 kV (50 Hz, 1 min.)
Color
green
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Typical deviation from the measuring range final value
0.02 %
Standards/regulations
EN 61000-4-6
Humidity
B
Identification
UL 508 Listed
Enclosure
Required protection according to the Rules shall be provided upon installation on board
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27200200
ECLASS 4.1
27200200
ECLASS 9.0
27210129
ETIM 7.0
EC002919
UNSPSC 13.2
41112105
UNSPSC 20.0
41112105
UNSPSC 18.0
41112105
Designation
Shipbuilding approval
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 4.0
EC001446
ECLASS 11.0
27210129
ECLASS 7.0
27200206

Product condition