2901533 Phoenix Contact Data & Networking Devices

2901533 Product Details

• MTTF
  889 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
• Width
  17.5 mm
• Altitude
  2000 m
• Input resistance current input
  < 70 Ω
• Description of the input
  Digital input
• Weight
  230 g
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Overvoltage category
  II
• Flammability rating according to UL 94
  V0
• Transient surge protection
  Yes
• Resolution
  16 bit
• Assembly instructions
  on standard DIN rail NS 35 in accordance with EN 60715
• Set consists of
  2709561 ME 17,5 TBUS 1,5/ 5-ST-3,81 GN
• Housing material
  PA 6.6-FR
• Permissible humidity (storage/transport)
  20 % ... 85 %
• Ambient temperature (operation)
  -40 °C ... 70 °C (>55°C derating)
• Permissible humidity (operation)
  20 % ... 85 %
• Height
  113 mm
• Mechanical service life
  1x 107 cycles
• Min. switching current
  ≥ 10 mA
Shock
16g, 11 ms
Maximum switching frequency
2 Hz
Depth
114.5 mm
Supply voltage
≥ 12 V DC (For passive sensors (via terminal PWR1, +I1))
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Degree of protection
IP20
Mounting position
any
Temperature coefficient, typical
typ. 0.0025 %/K (at -40 °C ... +70 °C)
ECLASS 6.0
27242600
ECLASS 4.1
27230200
Supply voltage range
19.2 V DC ... 30.5 V DC (DIN rail connector)
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
China RoHS
Environmentally Friendly Use Period = 50 years
Switching level "1" signal
10 V AC/DC ... 50 V AC/DC (Low-voltage input)
Min. voltage input signal
0 V AC/DC
Input frequency
≤ 2 Hz
Max. switching current
2 A (per channel)
Conductor cross section solid min.
0.2 mm²
Protective circuit
Transient protection of outputs
Voltage output signal
0 V ... 10 V
Max. voltage output signal
approx. 10.83 V
Current output signal
0 mA ... 20 mA
Max. current output signal
approx. 21.67 mA
Precision
≤ 0.02 % (at 25 °C)
Max. voltage input signal
250 V AC/DC
Load
≤ 500 Ω
Maximum switching voltage
250 V AC/DC
Connection method
Screw connection
Max. current consumption
< 1 mA
Electrical service life
2x 105 cycles (At 2 A, 250 V AC, cosφ 0.4)
Digital/analog I/O
300 V (Rated insulation voltage (in each case between the digital inputs and outputs and between the analog inputs and outputs, reinforced insulation according to EN 61010))
Number of inputs
2
Max. current input signal
22 mA
Digital I/O
2.5 kV AC (50 Hz, 1 min.)
UNSPSC 11
39121008
Degree of pollution
2
ETIM 7.0
EC001597
Current input signal
0 mA ... 20 mA (can be set via DIP switches)
Switching level "0" signal
0 V AC/DC ... 4 V AC/DC (Low-voltage input)
Number of outputs
2
Contact type
Changeover contact
ETIM 6.0
EC001597
Vibration (operation)
in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz
Conductor cross section flexible max.
2.5 mm²
Additional text
Please follow the special installation instructions in the documentation!
ECLASS 10.0.1
27242602
UNSPSC 7.0901
43223108
Behavior of the outputs (adjustable via DIP switch)
Hold / Reset
Conductor cross section AWG min.
24
Tightening torque
0.6 Nm
Certificate
R-R-PCK-2901533
Standards/specifications
EMC Directive 2014/30/EU EN 61000-6-2
ECLASS 11.0
27242602
ECLASS 9.0
27242602
UNSPSC 19.0
32151602
Contact material
AgSnO2
Switching capacity
120 W (24 V DC)
Analog I/O
1.5 kV AC (50 Hz, 1 min.)
Conductor cross section solid max.
2.5 mm²
Stripping length
7 mm
Designation
Corrosive gas test
Identification
ISA-S71.04-1985 G3 Harsh Group A
ECLASS 4.0
27230200
ECLASS 7.0
27242602
UNSPSC 21.0
32151602
Conductor cross section AWG max.
14
Status display
Green LED (supply voltage, PWR)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242200
ETIM 4.0
EC000310
UNSPSC 6.01
30211506
UNSPSC 18.0
32151602
UNSPSC 13.2
43223108
Screw thread
M3
ECLASS 5.0
27250600
ETIM 3.0
EC001423
UNSPSC 12.01
43223108
UNSPSC 20.0
32151602
Conductor cross section flexible min.
0.2 mm²

Product condition