2901431 Phoenix Contact Electrical Safety Devices

2901431 Product Details

• Depth
  114.5 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage UN
  230 V AC
• Recovery time
  1 s
• Max. permissible overall conductor resistance
  50 Ω
• Inrush current, minimum
  10 mA
• Maximum interrupting rating (inductive load)
  48 W (at 24 V DC)
• Switching capacity (360/h cycles)
  6 A (24 V DC)
• Connection method
  Push-in connection
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Category
  1 (up to Cat. 4 depending on the application)
• Standards/regulations
  DIN EN 50178/VDE 0160
• Vibration (operation)
  10 Hz ... 150 Hz, 2g
• ECLASS 11.0
  27371819
• ECLASS 5.1
  27371900
• ETIM 7.0
  EC001449
• UNSPSC 12.01
  39121501
• Max. permissible humidity (storage/transport)
  75 % (on average, 85% infrequently, non-condensing)
• Input voltage range in reference to UN
  0.85 ... 1.1
Status display
2 x green LEDs
Maximum switching voltage
250 V AC/DC
Maximum inrush current
6 A
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
Output fuse
10 A gL/gG NEOZED (Enabling current paths)
Mounting type
DIN rail mounting
Conductor cross section solid
0.2 mm² ... 1.5 mm²
Safety Integrity Level (SIL)
1 (up to SIL 3 depending on the application)
Safety Integrity Level Claim Limit (SIL CL)
1 (up to SILCL 3 depending on the application)
Degree of pollution
2
Overvoltage category
III
ECLASS 5.0
27371900
ECLASS 6.0
27371800
ECLASS 9.0
27371819
UNSPSC 19.0
39122205
Width
22.5 mm
Voltage at input/start and feedback circuit
~ 24 V DC
Typical release time
20 ms (when controlled via S11/S12)
Maximum switching frequency
0.5 Hz
Minimum switching voltage
10 V AC/DC
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mechanical service life
approx. 107 cycles
Degree of protection
IP20
Conductor cross-section AWG
24 ... 16
Conductor cross-section flexible with ferrule and plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Designation
Air clearances and creepage distances between the power circuits
Shock
15g
ECLASS 4.0
40020600
ETIM 4.0
EC001449
UNSPSC 6.01
30211901
UNSPSC 18.0
39122205
UNSPSC 21.0
39122205
Ambient temperature (operation)
-25 °C ... 55 °C
Maximum altitude
≤ 2000 m (Above sea level)
Typ. starting time with Us
300 ms (when controlled via A1 or S11/S12)
Operating voltage display
Green LED
Protective circuit
Surge protection Suppressor diode
Limiting continuous current
6 A (N/O contact)
Switching capacity min.
100 mW
Mounting position
any
pluggable
Yes
Stop category
0
Performance level (PL)
c (up to PL e depending on the application)
Rated surge voltage/insulation
4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371819
ETIM 6.0
EC001449
UNSPSC 7.0901
39121501
UNSPSC 11
39121501
UNSPSC 20.0
39122205
Height
112 mm
Max. permissible relative humidity (operation)
75 % (on average, 85% infrequently, non-condensing)
Typical input current at UN
22 mA
Typical response time
50 ms (manual start)
Contact type
3 enabling current paths
Contact material
AgSnO2, gold-flashed
Sq. Total current
72 A2
Nominal operating mode
100% operating factor
Net weight
99.9 g
Min. degree of protection of inst. location
IP54
Conductor cross-section flexible with ferrule without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Stripping length
8 mm
Rated insulation voltage
250 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
40020600
ECLASS 7.0
27371819
ETIM 3.0
EC001449
UNSPSC 13.2
39121501

Product condition