2901430 Phoenix Contact Electrical Safety Devices
Part#:2901430
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Safety relay for emergency stop and safety door up to SIL 1, SIL CL 1, Cat. 1, PL c, depending on the application up to SIL 3, SIL CL 3, Cat. 4, PL e, single-channel operation, 3 enabling current paths, nominal input voltage of 230 V AC/DC, plug-in screw
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2901430 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Depth 114.5 mm
- Maximum altitude ≤ 2000 m (Above sea level)
- Input voltage range in reference to UN 0.85 ... 1.1
- Typical response time 50 ms (manual start)
- Typical release time 20 ms (when controlled via S11/S12)
- Ambient temperature (operation) -25 °C ... 55 °C
- Sq. Total current 72 A2 (ITH2 = I12 + I22 + I32)
- Switching capacity (360/h cycles) 6 A (24 V DC)
- Output fuse 10 A gL/gG NEOZED (Enabling current paths)
- pluggable Yes
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Screw thread M3
- Width 22.5 mm
- Net weight 23 g
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Safety Integrity Level (SIL) 1 (up to SIL 3 depending on the application)
- Designation Air clearances and creepage distances between the power circuits
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 4.0 40020600
- ECLASS 5.1 27371900
- UNSPSC 6.01 30211901
- UNSPSC 13.2 39121501
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Height 99 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Voltage at input/start and feedback circuit ~ 24 V DC
- Typ. starting time with Us 300 ms (when controlled via A1 or S11/S12)
- Recovery time 1 s
- Max. permissible overall conductor resistance 50 Ω
- Contact material AgSnO2, gold-flashed
- Minimum switching voltage 10 V AC/DC
- Maximum inrush current 6 A
- Switching capacity min. 100 mW
- Nominal operating mode 100% operating factor
- Mounting type DIN rail mounting
- Min. degree of protection of inst. location IP54
- Category 1 (up to Cat. 4 depending on the application)
- Rated insulation voltage 250 V AC
- Degree of pollution 2
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27371800
- ECLASS 7.0 27371819
- UNSPSC 18.0 39122205
- UNSPSC 19.0 39122205
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Nominal input voltage UN 230 V AC
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Typical input current at UN 22 mA
- Status display 2 x green LEDs
- Operating voltage display Green LED
- Maximum switching frequency 0.5 Hz
- Maximum switching voltage 250 V AC/DC
- Interrupting rating (ohmic load) max. 144 W (at 24 V DC)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Mounting position any
- Degree of protection IP20
- Conductor cross-section AWG 24 ... 12
- Stop category 0
- Safety Integrity Level Claim Limit (SIL CL) 1 (up to SILCL 3 depending on the application)
- Overvoltage category III
- ECLASS 4.1 40020600
- ECLASS 9.0 27371819
- ETIM 4.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 21.0 39122205
- Protective circuit Surge protection Suppressor diode
- Contact type 3 enabling current paths
- Limiting continuous current 6 A (N/O contact)
- Inrush current, minimum 10 mA
- Maximum interrupting rating (inductive load) 48 W (at 24 V DC)
- Mechanical service life approx. 107 cycles
- Connection method Screw connection
- Stripping length 7 mm
- Performance level (PL) c (up to PL e depending on the application)
- Standards/regulations DIN EN 50178/VDE 0160
- ECLASS 11.0 27371819
- ECLASS 10.0.1 27371819
- ETIM 3.0 EC001449
- ETIM 6.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 20.0 39122205
- Rated surge voltage/insulation 4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
- Shock 15g
- REACh SVHC Lead 7439-92-1
- ECLASS 5.0 27371900
- ETIM 7.0 EC001449
- UNSPSC 12.01 39121501
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
