2901422 Phoenix Contact Electrical Safety Devices
Part#:2901422
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, single or two-channel operation, 3 enabling current paths, nominal input voltage of 120 V AC/DC, plug-in screw terminal blocks
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2901422 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -25 °C ... 55 °C
- Input voltage range 110 V AC/DC ... 120 V AC/DC
- Voltage at input/start and feedback circuit ~ 24 V DC
- Typical release time 60 ms (when controlled via A1)
- Max. permissible overall conductor resistance 50 Ω
- Minimum switching voltage 10 V AC/DC
- Sq. Total current 72 A2 (ITH2 = I12 + I22 + I32)
- Mechanical service life approx. 107 cycles
- Mounting position any
- pluggable Yes
- Performance level (PL) e
- Rated surge voltage/insulation 4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
- Shock 15g
- REACh SVHC Lead 7439-92-1
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Maximum altitude ≤ 2000 m (Above sea level)
- Typical input current at UN 38 mA
- Typical response time 40 ms (man. start)
- Status display Green LED
- Protective circuit Surge protection Varistor 275 VRMS (A1-A2)
- Contact material AgSnO2, + 0.2 µm Au
- Maximum inrush current 6 A
- Mounting type DIN rail mounting
- Connection method Screw connection
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- Rated insulation voltage 250 V AC
- Overvoltage category III
- ECLASS 10.0.1 27371819
- ECLASS 9.0 27371819
- UNSPSC 11 39121501
- UNSPSC 18.0 39122205
- Height 99 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Input voltage range in reference to UN 0.85 ... 1.1
- Typ. starting time with Us 330 ms (when controlled via A1)
- Operating voltage display Green LED
- Contact type 3 enabling current paths
- Limiting continuous current 6 A (N/O contact)
- Switching capacity min. 100 mW
- Switching capacity (360/h cycles) 6 A (24 V DC)
- Net weight 178.19 g
- Conductor cross-section AWG 24 ... 12
- Safety Integrity Level (SIL) 3
- Standards/regulations DIN EN 50178/VDE 0160
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 6.0 27371800
- ECLASS 5.1 27371900
- UNSPSC 6.01 30211901
- UNSPSC 13.2 39121501
- UNSPSC 21.0 39122205
- Width 22.5 mm
- Maximum switching voltage 250 V AC/DC
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Output fuse 10 A gL/gG NEOZED (N/O contact)
- Nominal operating mode 100% operating factor
- Degree of protection IP20
- Stop category 0
- Category 4
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 11.0 27371819
- ECLASS 4.0 40020600
- ETIM 3.0 EC001449
- ETIM 7.0 EC001449
- UNSPSC 20.0 39122205
- Depth 114.5 mm
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Recovery time 1 s
- Concurrence ∞
- Maximum switching frequency 0.5 Hz
- Inrush current, minimum 10 mA
- Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Min. degree of protection of inst. location IP54
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level Claim Limit (SIL CL) 3
- Degree of pollution 2
- ECLASS 4.1 40020600
- ECLASS 7.0 27371819
- ETIM 4.0 EC001449
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122205
- ECLASS 5.0 27371900
- ETIM 6.0 EC001449
- UNSPSC 7.0901 39121501
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
