2901417 Phoenix Contact Electrical Safety Devices
Part#:2901417
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, single or two-channel operation, 3 enabling current paths, nominal input voltage of 42 ... 48 V AC/DC, pluggable Push-in terminal block
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2901417 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Contact material AgSnO2, + 0.2 µm Au
- Inrush current, minimum 10 mA
- Switching capacity (360/h cycles) 6 A (24 V DC)
- Output fuse 10 A gL/gG NEOZED (N/O contact)
- Mounting position any
- Conductor cross-section flexible with ferrule and plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Stripping length 8 mm
- Standards/regulations DIN EN 50178/VDE 0160
- Shock 15g
- ECLASS 4.0 40020600
- ECLASS 7.0 27371819
- ETIM 4.0 EC001449
- UNSPSC 11 39121501
- UNSPSC 18.0 39122205
- Width 22.5 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Input voltage range in reference to UN 0.85 ... 1.1
- Typical release time 90 ms (when controlled via A1)
- Operating voltage display Green LED
- Max. permissible overall conductor resistance 50 Ω
- Protective circuit Surge protection Varistor 275 VRMS (A1-A2)
- Nominal operating mode 100% operating factor
- Connection method Push-in connection
- Min. degree of protection of inst. location IP54
- Designation Air clearances and creepage distances between the power circuits
- Safety Integrity Level (SIL) 3
- Safety Integrity Level Claim Limit (SIL CL) 3
- REACh SVHC Lead 7439-92-1
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 40020600
- ETIM 3.0 EC001449
- UNSPSC 7.0901 39121501
- UNSPSC 6.01 30211901
- Height 112 mm
- Input voltage range 42 V AC/DC ... 48 V AC/DC
- Typical input current at UN 95 mA
- Concurrence ∞
- Status display Green LED
- Maximum switching voltage 250 V AC/DC
- Sq. Total current 72 A2
- Switching capacity min. 100 mW
- Net weight 175.34 g
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Conductor cross-section AWG 24 ... 16
- Performance level (PL) e
- Rated surge voltage/insulation 4 kV / basic insulation (safe isolation, reinforced insulation, and 6 kV between A1-A2/logic/enabling and signaling current paths)
- ECLASS 11.0 27371819
- ECLASS 5.1 27371900
- ETIM 6.0 EC001449
- UNSPSC 20.0 39122205
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Ambient temperature (operation) -25 °C ... 55 °C
- Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
- Maximum altitude ≤ 2000 m (Above sea level)
- Typical response time 40 ms (man. start)
- Maximum switching frequency 0.5 Hz
- Contact type 3 enabling current paths
- Maximum inrush current 6 A
- Interrupting rating (ohmic load) max. 144 W (24 V DC, τ = 0 ms)
- Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
- Degree of protection IP20
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Stop category 0
- Rated insulation voltage 250 V AC
- Overvoltage category III
- ECLASS 10.0.1 27371819
- ECLASS 9.0 27371819
- UNSPSC 12.01 39121501
- UNSPSC 19.0 39122205
- Depth 114.5 mm
- Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
- Voltage at input/start and feedback circuit ~ 24 V DC
- Typ. starting time with Us 330 ms (when controlled via A1)
- Recovery time 1 s
- Minimum switching voltage 10 V AC/DC
- Limiting continuous current 6 A (N/O contact)
- Maximum interrupting rating (inductive load) 48 W (24 V DC, τ = 40 ms)
- Mechanical service life approx. 107 cycles
- Mounting type DIN rail mounting
- pluggable Yes
- Conductor cross-section flexible with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
- Category 4
- Degree of pollution 2
- Vibration (operation) 10 Hz ... 150 Hz, 2g
- ECLASS 5.0 27371900
- ECLASS 6.0 27371800
- ETIM 7.0 EC001449
- UNSPSC 13.2 39121501
- UNSPSC 21.0 39122205
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨