2897758 Phoenix Contact Programmable Logic Controllers

2897758 Product Details

• Note on dimensions
  Specfications with connectors
• Degree of protection
  IP20
• Air pressure (storage/transport)
  70 kPa ... 106 kPa (up to 3000 m above sea level)
• Note on weight specifications
  with connectors
• Connection method
  Inline connector
• Reverse voltage resistance to short pulses
  Reverse voltage proof
• Connection in acc. with standard
  CUL
• Number of devices with parameter channel
  max. 8
• Type of protection
  Short-circuit protection of the communications power
• Input name
  Digital inputs
• Input voltage range "1" signal
  15 V DC ... 30 V DC
• Delay at signal change from 1 to 0
  1.2 ms
• Nominal load, inductive
  12 VA (1.2 H, 48 Ω)
• REACh SVHC
  Lead 7439-92-1
• ETIM 4.0
  EC001604
• UNSPSC 18.0
  32151602
• UNSPSC 19.0
  32151602
• Output current when switched off
  max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
• Height
  119.8 mm
• Ambient temperature (storage/transport)
  -25 °C ... 85 °C
Air pressure (operation)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Net weight
320 g
Transmission speed
500 kbps / 2 Mbps (automatic detection, no combined system)
Permissible conductor cross section
0.14 mm² ... 0.22 mm² (twisted pair)
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Number of inputs
8
Power consumption
typ. 3 W (entire device)
Nominal input current at UIN
typ. 3 mA
Number of outputs
4
Output voltage
24 V DC -1 V (At nominal current)
Nominal load, ohmic
12 W
Protection class
III (IEC 61140, EN 61140, VDE 0140-1)
ECLASS 11.0
27242608
ECLASS 9.0
27242608
UNSPSC 6.01
43172015
Depth
71.5 mm
Mounting type
DIN rail mounting
Designation
Segment circuit supply (US)
Transmission physics
Ethernet in RJ45 twisted pair
Number of supported devices
max. 63 (per station)
UNSPSC 20.0
32151602
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Limitation of the voltage induced on circuit interruption
approx. -30 V
Immunity to ESD
Noise immunity test in accordance with EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2/IEC 61000-4-2 Criterion B, 6 kV contact discharge, 6 kV air discharge (without marking field)8 kV air discharge (with marking fields in place)
Ambient temperature (operation)
-25 °C ... 60 °C
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Diagnostics messages
Short-circuit or overload of the digital outputs Yes
Note on the connection method
Auto negotiation and autocrossing
Supply voltage
24 V DC (via Inline connector)
Nominal load, lamp
12 W
Behavior with inductive overload
Output can be destroyed
Interference emission
Noise emission test as per EN 61000-6-4 EN 55011 Class A
Immunity to surge
Noise immunity test in accordance with EN 61000-6-2 Transient overvoltage (surge) EN 61000-4-5/IEC 61000-4-5 Criterion B, supply lines DC: 0.5 kV/0.5 kV (symmetrical/asymmetrical), fieldbus cable shield 1 kV
UNSPSC 7.0901
43201404
UNSPSC 12.01
43201404
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Width
80 mm
Nominal output voltage
24 V DC
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Color
green
Number
2
Amount of process data
max. 512 Byte (per station)
Number of supported branch terminals with remote bus branch
0
Power supply unit
max. 8 A DC (sum of UM + US)
Behavior with overload
Auto restart
Immunity to burst
Noise immunity test in accordance with EN 61000-6-2 Fast transients (burst) EN 61000-4-4/IEC 61000-4-4 Criterion A, all interfaces 1 kVCriterion B, all interfaces 2 kV
Immunity to conducted interference
Noise immunity test in accordance with EN 61000-6-2 Conducted interference EN 61000-4-6/IEC 61000-4-6 Criterion A, Test voltage 10 V
UNSPSC 11
43172015
Immunity to EF
Noise immunity test in accordance with EN 61000-6-2 Electromagnetic fields EN 61000-4-3/IEC 61000-4-3 Criterion A, Field intensity: 10 V/m
Mechanical tests
Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g
ECLASS 4.0
27250200
UNSPSC 13.2
32151602
UNSPSC 21.0
32151602
ECLASS 10.0.1
27242608
Input voltage range "0" signal
-30 V DC ... 5 V DC
Protective circuit
Short-circuit and overload protection Freewheeling circuit in the output driver
Output name
Digital outputs
ETIM 2.0
EC001434
ECLASS 5.1
27242600
Current consumption
min. 6 mA (without connected peripherals)
Connection technology
3-conductor
Input voltage
24 V DC
Delay at signal change from 0 to 1
1.2 ms
Nominal input voltage UIN
24 V DC
ECLASS 6.0
27242600
ECLASS 7.0
27242608
ECLASS 5.0
27250200
Description of the input
EN 61131-2 type 1
Typical response time
approx. 500 µs
Typical input current per channel
typ. 3 mA
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27250200
ETIM 7.0
EC001604
ETIM 6.0
EC001604
ETIM 3.0
EC001604

Product condition