2868606 Phoenix Contact Redundancy Modules

2868606 Product Details

• Depth
  61 mm
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Nominal input current
  2x 5 A (-25 °C ... 55 °C)
• Height
  90 mm
• Installation distance right/left
  0 mm / 0 mm
• Nominal input voltage range
  5 V DC ... 24 V DC
• Connection in series
  No
• Protection class
  III
• Connection method
  Screw connection
• Conductor cross section flexible min.
  0.2 mm²
• EMC requirements for noise immunity
  EN 61000-6-1
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Frequency range
  150 kHz ... 80 MHz
• Surge voltage load (surge)
  EN 61000-4-5
• Criterion A
  Normal operating behavior within the specified limits.
• REACh SVHC
  Lead 7439-92-1
• ECLASS 9.0
  27371010
• ETIM 6.0
  EC002540
• UNSPSC 12.01
  39121004
• UNSPSC 21.0
  32151504
Width
18 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Input voltage range
4.5 V DC ... 30 V DC
Setting range of the output voltage (USet)
5 V DC ... 24 V DC
Efficiency
> 97 %
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Conductor cross section solid min.
0.2 mm²
Screw thread
M3
UL approvals
UL/C-UL listed UL 508
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
10 V/m (Test Level 3)
Conducted interference
EN 61000-4-6
Voltage
10 V (Test Level 3)
ECLASS 11.0
27371010
ECLASS 5.1
27371000
ETIM 7.0
EC002540
UNSPSC 6.01
30211502
Installation distance top/bottom
30 mm / 30 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55° C derating : 2.5%/K)
Degree of pollution
2
Nominal output voltage
24 V DC
Derating
55 °C ... 70 °C (2.5%/K)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible max.
2.5 mm²
Conductor cross section AWG max.
12
EMC requirements for noise emission
EN 61000-6-3
Electrostatic discharge
EN 61000-4-2
Comments
Criterion A
I/O/S
asymmetrical
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 4.1
27250300
ETIM 3.0
EC000599
UNSPSC 11
39121004
UNSPSC 13.2
39121004
Degree of protection
IP20
Climatic class
3K3 (in acc. with EN 60721)
Power loss nominal load max.
2.5 W (IOUT = 5 A)
Net weight
0.1 kg
Conductor cross section AWG min.
24
Standard - Electrical safety
IEC 60950-1/VDE 0805 (SELV)
Discharge in air
8 kV (Test Level 3)
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Input
2 kV (Test Level 3 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 7.0
27371010
ECLASS 6.0
27371000
UNSPSC 7.0901
39121004
UNSPSC 19.0
32151504
Nominal output current (IN)
10 A (Increasing power)
Housing material
Plastic
Conductor cross section solid max.
2.5 mm²
Stripping length
6.5 mm
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Contact discharge
4 kV (Test Level 2)
Output
2 kV (Test Level 3 - asymmetrical)
Voltage dips
EN 61000-4-11
ECLASS 10.0.1
27371010
ECLASS 4.0
27250300
ECLASS 5.0
27371000
ETIM 4.0
EC002542
UNSPSC 18.0
32151504
UNSPSC 20.0
32151504

Product condition