2814663 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2814663
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: MCR current measuring transducer, programmable and configurable, for measuring direct, alternating and distorted currents, with relay and transistor output, input current 0...10 to 0...50 A, configured
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2814663 Phoenix Contact price in the box on the right side or send a quick quote.
2814663 Product Details
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Input Current measuring input
- Degree of protection IP20
- Surge strength Depending on through connected conductor
- Load/output load voltage output > 10 kΩ
- Maximum switching voltage 30 V AC
- Continuous load current 80 mA (Not short-circuit proof)
- Height 99 mm
- Noise immunity EN 61000-6-2
- Operate threshold 0.8 % (of measuring range nominal value 50 A)
- Overload capacity Depending on through connected conductor
- Connection method Screw connection
- Contact material AgSnO, hard gold-plated
- Setting range of the response delay 0.1 s ... 20 s
- Screw thread M3
- Step response (10-90%) 330 ms (with AC)
- Test voltage input/power supply 4 kV (50 Hz, 1 min.)
- Mounting position any
- Conformance CE-compliant
- ECLASS 4.1 27200300
- ECLASS 6.0 27210100
- ETIM 7.0 EC002475
- UNSPSC 19.0 39121032
- Maximum altitude < 2000 m
- Ambient temperature (operation) -20 °C ... 60 °C
- Impulse form AC, DC or distorted currents
- Load/output load current output < 500 Ω
- Output name Transistor output, pnp
- Output voltage range 19 V ... 29 V (supply voltage - 1 V)
- Status display Green LED
- Conductor cross section flexible 0.2 mm² ... 2.5 mm²
- Rated insulation voltage 300 V AC (to earth)
- ETIM 3.0 EC002475
- ETIM 6.0 EC002475
- ECLASS 9.0 27210123
- UNSPSC 18.0 39121032
- UNSPSC 20.0 39121032
- Width 22.5 mm
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Setting range for max. input current 0 A ... 55 A
- Frequency measuring range 15 Hz ... 400 Hz
- Current output signal 0 mA ... 20 mA
- Limiting continuous current 50 mA (for gold layer, 30 V AC/ 36 V DC)
- Stripping length 8 mm
- Conductor cross section solid 0.2 mm² ... 2.5 mm²
- UNSPSC 6.01 30211506
- UNSPSC 13.2 39121032
- Depth 114.5 mm
- Configurable/programmable Yes, preconfigured
- Setting range for min. input current 0 A ... 9.5 A
- Voltage output signal 0 V ... 10 V
- ETIM 4.0 EC002475
- ECLASS 7.0 27210123
- UNSPSC 11 39121008
- UNSPSC 21.0 39121032
- Max. current consumption < 50 mA (without load)
- Conductor cross section AWG 24 ... 14
- Overvoltage category III
- Electromagnetic compatibility Conformance with EMC directive
- REACh SVHC Lead 7439-92-1
- Contact type 1 changeover contact
- Supply voltage range 20 V DC ... 30 V DC
- Maximum transmission error < 0.5 % (of nominal range value under nominal conditions)
- Identification Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X
- ECLASS 4.0 27271100
- China RoHS Environmentally Friendly Use Period = 50 years
- Degree of pollution 2
- Color green
- Low Voltage Directive Conformance with Low Voltage Directive
- UL, USA/Canada Class I, Zone 2, AEx nA nC IIC T4, Ex nA nC IIC T4 Gc X
- ECLASS 11.0 27210123
- Setting range of the threshold value 1 % ... 110 %
- Test voltage output/power supply 500 V (50 Hz, 1 min.)
- Housing material Polyamide PA non-reinforced
- Designation UL, USA/Canada
- ECLASS 5.0 27200300
- UNSPSC 12.01 39121008
- Temperature coefficient, typical < 0.025 %/K
- Test voltage input/output 4 kV (50 Hz, 1 min.)
- Noise emission EN 61000-6-4
- Connection in acc. with standard CUL
- ECLASS 10.0.1 27210123
- ECLASS 5.1 27200300
- UNSPSC 7.0901 39121008
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2814663
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨